Aviom D800-Dante A-Net® Distributor, with A-Net Bridge input and Dante™ interface

Vendor: Aviom
Description Aviom D800-Dante A-Net® Distributor, with A-Net Bridge input and Dante™ interface The Aviom D800-Dante A-Net® Distributor is designed for providing the link between the console card and input module and the Personal...
$3,299.00 $3,350.00
Title

Aviom D800-Dante A-Net® Distributor, with A-Net Bridge input and Dante™ interface

The Aviom D800-Dante A-Net® Distributor is designed for providing the link between the console card and input module and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.

This unit is also integrate additional advanced options intended for delivering high-channel-count audio streams to your Personal Mixers, transmitters for wireless in-ear monitors and streamlining connections between A360s, integrating the A360 Display iOS app.

Simple setup. Powerful performance.

The Aviom D800-Dante A-Net® Distributor, on the most basic level can do an unglamorous but important job: it is getting the audio and power to you Personal Mixers. Set-up is a breeze, with no switch, IP addressing, or routing managing to worry about, so in no time you can get set up and start mixing, without a lot of hassle.

Get more channels to your mixers

The Aviom D800 and D800-Dante is able to combine up to four 16-channel A-Net streams, it is used in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), for sending up to 64 channels directly from your digital console all the way to your Aviom Personal Mixers. By the use of A360 Channel Manager the mix channels can be individually selected for each A360 Personal Mixer, this allow each musician for mixing exactly the sources they need.

Connect directly to Dante

If your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Mix channels can be individually selected for each A360 using A360 Channel Manager. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers. Use the Dante Controller Mac/PC software application for channel routing.

Grow your system

If you need more than eight Personal Mixers, both the D800 and the D800-Dante include an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.

Precision Engineered for Reliability

From the innovative power supply sub-system to the mechanical design to the whisper-quiet thermal management, the D800 and D800-Dante are built to give you rock-solid performance you can count on.

Network Mix Back for wireless in-ears

If you're using A360 Personal Mixers, the D800 and D800-Dante eliminate the need for running analog cables from A360s to the transmitter units for the in-ear monitors.

Extend the interface with iOS

The D800 and D800-Dante manage communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display™ app alongside their A360.

Dante Primary I/O Locking RJ45 connector
Dante Secondary I/O Locking RJ45 connector
Stereo Link Four DIP Switch blocks: 1-16, 17-32, 33-48, and 49-64;
used to set up to 32 channel pairs as stereo links
Stereo Link Defeat Bypasses DIP switch stereo link settings
Disable DIP switch Chooses Dante (down) or A-Net In (up) as the input source for the D800-Dante
ID1, ID2 DIP Switch Reserved
A, B, C, D DIP switch Reserved
LEDs (rear panel) Error (red);
Sync (green);
1GB Active (red);
Network Activity (green)
Supported Dante Sample Rates 44.1, 48kHz - 64 channels
88.2, 96kHz - 32 channels
176.4, 192kHz - 16 channels
Static IP support Yes
AES67 Support Yes