Williams Sound IR T2, Commercial-grade, medium-area infrared transmitter ideal for assistive listening and language interpretation in commercial spaces.

Vendor: Williams Sound
Descriptions Williams Sound IR T2, Commercial-grade, medium-area infrared transmitter ideal for assistive listening and language interpretation in commercial spaces. The new Williams Sound IR T2 is a commercial-grade, medium-area infrared transmitter. Its sleek,...
$555.00 $617.00
Title

Williams Sound IR T2, Commercial-grade, medium-area infrared transmitter ideal for assistive listening and language interpretation in commercial spaces.

The new Williams Sound IR T2 is a commercial-grade, medium-area infrared transmitter. Its sleek, compact footprint which is ideal for assistive listening and language interpretation in commercial spaces such as conference rooms, assisted living facilities, small cinema/theaters, classrooms and courtrooms. The new Williams Sound IR T2 infrared transmitter offers 50 percent greater coverage than the previous IR device (WIR TX75) and new control system readiness — all at a more affordable price. With a significantly wider coverage pattern and more power, there is no need for the additional expense of secondary units. This device has replaced the WIR TX75.

Williams Sound IR T2 Main Features

The Williams Sound IR T2 can be controlled remotely via RS-232 commands. The commands include:

  • Powering the unit on/off
  • Remotely setting the IR frequency (2.3/2.8 or 3.3/3.8)
  • Muting the outgoing audio without powering off
  • Turning back panel LEDs on or off
  • Troubleshooting abilities

IR T2

Dimensions:

9.0″ W (229 mm) x 3.8″ D (97 mm) x 1.4″ H (36 mm)

Weight:

0.84 lb. (0.38 kg)

Color:

Black

Power Supply:

TFP 057 Desktop style international certified power supply with IEC line cord, 100-240 VAC input, 50-60 Hz, 18 W; 48 VDC output

DC Power Input:

2.1 mm ID barrel connector, 48 VDC, 0.2A, center positive

Power Indicator:

Green LED

Sleep/Power Save Mode:

Shuts off carrier when no audio present for 12 minutes

Modulation:

FM Wideband, ±50 kHz deviation max, 50 μS pre-emphasis

Baseband Frequencies:

2.3, 2.8, 3.3, 3.8 MHz

Coverage Area:

Up to 18,000 sq. ft (1,673 sq. m) in single-channel mode with the RX22-4 receiver
Up to 11,500 sq. ft (1,068 sq. m) with the RX20 receiver

Microphone gain adjust: Rotary 10 dB range
Microphone channel switch: Selects microphone input to Ch. A or Ch. B
Microphone input: 3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (6 VDC bias supply with 2.7 k ohm series resistor)

Audio Inputs:

Line inputs: Phoenix style connector jack for Ch A and Ch B accept line level, balanced or unbalanced audio

Audio Indicators:

One yellow LED per channel. Lights up and stay on steady with minimum audio level.

Signal-to-Noise Ratio:

70 dB (line input)

Frequency Response:

95 Hz to 17.6 kHz, -3 dB re 1 kHz (line inputs)
125 Hz to 17.0 KHz, -3 dB re 1 kHz (microphone input)

Operating Requirements:

32°-122°F (0-50°C)

Mounting Kit:

Wall or Ceiling mount: BKT 024 Omnidirectional mount

Compatible Receivers:

WIR RX22-4, IR RX20

Warranty:

5 years

Approvals/Regulatory Compliance:

CE, FCC, Industry Canada, WEEE, RoHS, CB Scheme, RCM, PSE