TANNOY CMS 503ICT LP 5" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Low Profile) (CMS 503ICT LP)

Vendor: Tannoy
TANNOY CMS 503ICT LP 5" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Low Profile) (CMS 503ICT LP) The CMS 503ICT LP is a full bandwidth 200-watt high-sensitivity loudspeaker that utilizes...
$259.00
Title

TANNOY CMS 503ICT LP 5" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Low Profile) (CMS 503ICT LP)

The CMS 503ICT LP is a full bandwidth 200-watt high-sensitivity loudspeaker that utilizes our third-generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 5" ICT (Inductive Coupling Technology) point source driver with an extended frequency range, the UL-certified CMS 503ICT LP delivers consistent broadband directivity with enhanced intelligibility. ICT drivers provide exceptional long-term reliability – and are ideal for constant-usage applications.

Optimized for Installation

The CMS 503ICT LP is meticulously crafted with a 4-way self-aligning clamp system, ensuring swift, straightforward, and cost-effective installation. Its ultra-shallow back can suits applications with limited cavity space, complemented by a removable locking screw terminal connector offering loop-thru functionality. This model includes a low-insertion loss 30 W transformer with user-friendly front panel tap switching, a paintable powder-coated steel mesh grille providing dust protection, along with two tile support rails and a C-ring. For aesthetic purposes, an Arco-style grille designed to conceal the entire unit, and a plaster (mud) ring, are available separately.

LAB GRUPPEN Ready

The CMS 503ICT LP is finished in semi-matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.

Product Features

  • Full range ceiling loudspeaker for installation applications

  • 50 Watts continuous, 200 Watts peak power

  • 5" ICT (Inductive Coupling Technology) point source driver for extended frequency range

  • Ultra-shallow depth profile for applications where cavity space is restricted

  • High durability design for constant heavy usage in demanding applications

  • UL 1480 certified for general signalling systems

  • UL 2043 certified for air-handling spaces

  • Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input

  • Low insertion loss 30 W line transformer with easily accessible tapping switch

  • Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel

  • Semi matt white finish fits unobtrusively in any environment

  • Powder coated UV resistant perforated steel mesh grille with dust protection

  • Removable magnetic grille for custom painting

  • Optional ARCO designer grilles available for minimal architectural impact

  • Self-aligning 4 way clamp mounting system

  • Mounting C-ring and ceiling tile rails included

Performance
Frequency response (-3 dB) <sup>(1)</sup>

88 Hz - 50 kHz

Frequency range (-10 dB) <sup>(1)</sup>

77 Hz - 54 kHz

System sensitivity (1 W @ 1 m) <sup>(2)</sup>

89 dB (1 W = 4 V for 16 Ohms)

Nominal Coverage Angle

90 degrees conical

Power Handling <sup>(3)</sup>
Average

50 W

Programme

100 W

Peak

200 W

Recommended Amplifier Power

100 W @ 16 Ohms

Nominal Impedance (Lo, Z)

16 Ohms

Rated maximum SPL
Average

106 dB

Peak

112 dB

Transformer Taps (via front rotary switch)
70 V

30 W (165 O) / 15 W (330 O) /
7.5 W (660 O) / 3.75 W (1320 O) /
OFF & low impedance operation

100 V

30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O)
/ OFF & low impedance operation

Transducers
Low Frequency

1 x 130 mm (5.0") mineral loaded polypropylene

High Frequency

ICT

Physical
Enclosure
Backcan

Zinc plated steel

Baffle

Reflex loaded UL 94V-0 rated ABS

Grille

Steel, with weather resistant coating

Safety Features

Safety ring located at rear of enclosure for load bearing safety bond

Clamping Design

Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36")
Recommended clamp torque: 1.5 Nm

Cable Entry Options

Cable clamp & squeeze connector for conduit up to 22 mm

Connectors

Removable locking connector with screw terminals with “loop through” facility

Compliance

UL-1480, UL-2043, CE

Dimensions
Bezel diameter

274.0 mm (10.79")

Front of ceiling to rear of backcan

98.6 mm (3.88")

Hole cutout diameter

253.0 mm (9.96")

Net Weight (ea)

4.4 kg (9.70 lbs)

Included Accessories

C-Ring, tile-bridge kit, paint mask, cut-out template, grille

Optional Accessories

Plaster (mud) ring, Arco grille

Packed Quantity

2

1. Average over stated bandwidth. Measured in an IEC baffle in an Anechoic Chamber
2. Unweighted pink noise input, measured at 1 metre on axis
3. Long term power handling capacity as defined in EIA - 426B test