Tannoy CMS503DCLP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver

Vendor: Tannoy
Description Tannoy CMS503DCLP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver (Low Profile) [Priced Individually, Sold in Pairs] The CMS 503DC LP is a professionally designed full bandwidth 240-Watt high sensitivity loudspeaker...
$279.00
Title

Tannoy CMS503DCLP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver (Low Profile) [Priced Individually, Sold in Pairs]

The CMS 503DC LP is a professionally designed full bandwidth 240-Watt high sensitivity loudspeaker that is capable to utilize the Tannoy's third generation Ceiling Monitor System technology (CMS 3.0). Give all the credits to an all-new proprietary 5" Dual Concentric point-source driver that comes along with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 503DC LP is capable to deliver a wide and consistent broadband directivity along with enhanced intelligibility -plus highly accurate and linear response.

Optimized for Installation
Specifically designed along with a 4 way self-aligning clamp system designed for fast, simple and cost effective installation, CMS 503DC LP comes featuring an ultra-shallow back can intended for use in applications where cavity space is limited and a removable locking screw terminal connector that comes along with loop-thru functionality. A low-insertion loss 30 W transformer that comes with convenient front panel tap switching, paintable powder coated steel mesh grille that comes along with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which is concealing the entire unit intended for aesthetic purposes and plaster (mud) ring are available separately.

LAB GRUPPEN Ready
The CMS 503DC LP is finished in semi matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.

Features

  • Full range ceiling loudspeaker for installation applications
  • 60 Watts continuous, 240 Watts peak power
  • Next generation 5" Dual Concentric driver featuring Omnimagnet technology
  • Torus Ogive waveguide for improved high frequency response and directivity
  • Ultra-shallow depth profile for applications where cavity space is restricted
  • UL 1480 certified for general signalling systems
  • UL 2043 certified for air-handling spaces
  • Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
  • Low insertion loss 30 W line transformer with easily accessible tapping switch
  • Optimized for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
  • Semi matt white finish fits unobtrusively in any environment
  • Powder coated UV resistant perforated steel mesh grille with dust protection
  • Removable magnetic grille for custom painting
  • Optional ARCO designer grilles available for minimal architectural impact
  • Self-aligning 4 way clamp mounting system
  • Mounting C-ring and ceiling tile rails included

Applications

Applications
Voice Alarm Systems
Multizone Foreground Music & Paging Systems
Boardrooms & Offices
Business Music Systems
Airports, Convention Centers, Hotels
Reception / Waiting Rooms
Houses of Worship
Retail Outlets / Shopping Malls
Lounges / Bars
Cruise Ships
Courtrooms

Performance

Frequency response (-3 dB)
88 Hz - 22 kHz
Frequency range (-10 dB)
77 Hz - 24 kHz
System sensitivity (1 W at 1 m)
89 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle
90 degrees conical
Power Handling
Average: 60W
Programme: 120W
Peak: 240W
Recommended Amplifier Power
120 W at 16 Ohms
Nominal Impedance (Lo, Z)
16 Ohms
Rated maximum SPL
Average: 107 dB
Peak: 113 dB
Transformer Taps-via front rotary switch
70V: 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / 3.75 W (1320 Ohms) / OFF & low impedance operation
100V: 30 W (330 Ohms) / 15 W (660 Ohms) / 7.5 W (1320 Ohms) / OFF & low impedance operation

Transducers

Dual Concentric point source driver
1x 5" (12.70cm) Dual Concentric driver, using Omnimagnet technology
Low Frequency
1.38" (3.51cm) voice coil, treated multi fiber paper pulp cone
High Frequency
0.79" (2.01cm) PEI dome

Physical

Backcan
Zinc plated steel
Baffle
Reflex loaded UL 94V-0 rated ABS
Grille
Steel, with weather resistant coating
Safety Functions
Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design
Security toggle clamp
Min / Max clamping range 0.37" (0.94cm) /2.36" (5.99cm)
Recommended clamp torque: 1.5 Nm
Cable Entry Options
Cable clamp & squeeze connector for conduit up to 22 mm
Connectors
Removable locking connector with screw terminals with "loop through" facility
Compliance
UL-1480, UL-2043, CE
Dimensions
Bezel diameter: 10.79" (27.41cm)
Front of ceiling to rear of backcan: 3.88" (9.86cm)
Hole cutout diameter: 9.96" (25.30cm)
Weight
3.3kg (7.28 lbs)