FREE CHURCH DESIGNS
Call us 1-877-477-6543 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
Crown DCi 4|300DA DCI4300 DANTE
Vendor: Crown
Crown DCi 4|300DA DCI4300 DANTE
The Crown DCi 4|300DA is one of the Crown DriveCore Install DA Series. It is a Four-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V. For applications requiring Dante or AES67 networked audio it is the perfect unit to use. It is designed for providing a balance combination of channel count, output power and speaker load flexibility that works alongside with proprietary DriveCore® technology for maximum efficiency and admirable audio quality. The DCi DA Series comes with network control/monitoring, a high-powered DSP with JBL speaker tunings and the ability to drive 70V and 100V, 2/4/8/16 ohm speaker loads. The Crown DCi 4|300DA amplifier is perfect for installations, that have standardized on Dante for networked audio transport, because of its advanced capabilities and support for Dante Domain Manager.
Features
- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
- Redundant, independent Dante / AES67 ports
- Primary & Secondary
- Will accept 48khz or 96khz
- Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
- Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP
- 48kHz processing
- 20 Presets
- Input router
- High, medium, and low priority inputs
- Input delay up to 2s
- Input EQ
- Crossover
- Output EQ
- Output Delay up to 100ms
- LevelMAX limiter
- Load Monitoring
- Pilot tone
- Normal
- Burst
- Continuous Load Monitoring
- Sweep Load Monitoring
- Channel Auto-Standby
- Speaker Tunings
- Aux-Port
- Sleep contact closure
- Amp Status output
- Removable air filters
- Front panel LED indicators
- AES67 Compatible
