FREE CHURCH DESIGNS
Call us 1-877-477-6543 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
Crown DCi 2|1250N Two-channel, 1250W @ 4Ω Power Amplifier with BLU link, 70V/100V
Vendor: Crown
Crown DCi 2|1250N Two-channel, 1250W @ 4Ω Power Amplifier with BLU link, 70V/100V
The Crown DCi 2|1250N is an Two-channel, 1250W @ 4Ω Power Amplifier with BLU link, 70V/100V. It is a part of the new DriveCore install series amplifiers which is a complete line of high performance installation amplifiers that is designed based on the proprietary DriveCore technology. The Crown DCi 2|1250N is designed and professionally engineered, and manufactured, to the highest quality standards of the industry, and capable of providing system integrators with the advanced features and flexibility that are the requirements for challenging 21st century installed sound applications. The Crown DCi 2|1250N is also highly energy-efficient, compact, and versatile, it proves that the Crown tradition of leadership, in terms professional and commercial power amplifier technology, is still unbroken!
Features
ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.
NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Delay
- Matrix Mixer
- Speaker Line Monitoring
| Frequency Response ( 8 Ohms, 20 Hz - 20 kHz) | +/- 0.25 dB |
| BLU Link Input Signal to Noise Ratio (A-Weighted) | > 104dB |
| Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz) | 0.35% |
| Voltage Gain | 34 dB |
| Damping Factor (20 Hz to 100 Hz) | >1500 |
| Input Impedance (nominal balanced, unbalanced) | 10 kOhms, 5 kOhms |
| Maximum Input Level before Compression | +20 dBu |
| Load Impedance (Stereo/Dual Mode) | 2 - 16 Ohms; 70Vrms and 100Vrms |
| Load Impedance Bridge Mono | 4 - 16 Ohms; 140Vrms and 200Vrms |
| Cooling | Continuously variable speed forced air, front to back airflow |
| Maximum Fan Noise (re dBA SPL @ 1M) | 45 |
| Required AC Mains (+/- 10%) | 100V-240V ~ 50/60 Hz |
| Dimensions | 19" x 3.5" x 14.25" (48.3cm x 8.9cm x 35.63cm) |
| Weight | 23.5lbs (10.66kg) |
| IEC Power Connector | 15A |
