Crown DCi 4|600DA DCI4600 DANTE

Vendor: Crown
Description Crown DCi 4|600DA DCI4600 DANTE The Crown DCi 4|600DA is one of the Crown DriveCore Install DA Series. It is a Four-channel, 600W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio,...
$5,040.00
Title

Crown DCi 4|600DA DCI4600 DANTE

The Crown DCi 4|600DA is one of the Crown DriveCore Install DA Series. It is a Four-channel, 600W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V. For applications requiring Dante or AES67 networked audio it is the perfect unit to use. It is designed for providing a balance combination of channel count, output power and speaker load flexibility that works alongside with proprietary DriveCore® technology for maximum efficiency and admirable audio quality. The DCi DA Series comes with network control/monitoring, a high-powered DSP with JBL speaker tunings and the ability to drive 70V and 100V, 2/4/8/16 ohm speaker loads. The Crown DCi 4|600DA amplifier is perfect for installations, that have standardized on Dante for networked audio transport, because of its advanced capabilities and support for Dante Domain Manager.

Features

  • Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
  • Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
  • Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
  • Digital Signal Processing – DSP capabilities include the following:
    • LevelMAX Limiters
    • Input/Output EQ
    • Crossover
    • Delay
    • Matrix Router
    • Speaker Line Monitoring

  • Redundant, independent Dante / AES67 ports
  • Primary & Secondary
  • Will accept 48khz or 96khz
  • Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
    • Audio Architect Control and Monitoring
    • DriveCore Amplifier Technology
    • Universal PFC Power Supply
    • DSP
  • 48kHz processing
  • 20 Presets
  • Input router
    • High, medium, and low priority inputs
  • Input delay up to 2s
  • Input EQ
  • Crossover
  • Output EQ
  • Output Delay up to 100ms
  • LevelMAX limiter
  • Load Monitoring
    • Pilot tone
  • Normal
  • Burst
    • Continuous Load Monitoring
    • Sweep Load Monitoring
  • Channel Auto-Standby
  • Speaker Tunings
    • Aux-Port
  • Sleep contact closure
  • Amp Status output
    • Removable air filters
    • Front panel LED indicators
    • AES67 Compatible