Crown DCi2|2400N Two-channel, 2400W @ 4Ω Power Amplifier with BLU link, 70V/100V

Vendor: Crown
Description Crown DCi2|2400N Two-channel, 2400W @ 4Ω Power Amplifier with BLU link, 70V/100V The Crown DCi2|2400N is an Two-channel, 2400W @ 4Ω Power Amplifier, 70V/100V. It is a part of the new DriveCore install...
$6,642.00
Title

Crown DCi2|2400N Two-channel, 2400W @ 4Ω Power Amplifier with BLU link, 70V/100V

The Crown DCi2|2400N is an Two-channel, 2400W @ 4Ω Power Amplifier, 70V/100V. It is a part of the new DriveCore install series amplifiers which is a complete line of high performance installation amplifiers that is designed based on the proprietary DriveCore technology. The Crown DCi2|2400N is designed and professionally engineered, and manufactured, to the highest quality standards of the industry, and capable of providing system integrators with the advanced features and flexibility that are the requirements for challenging 21st century installed sound applications. The Crown DCi2|2400N is also highly energy-efficient, compact, and versatile, it proves that the Crown tradition of leadership, in terms professional and commercial power amplifier technology, is still unbroken!

Network Power Matrix

Network Power Matrix Bridge

Features

ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

DIGITAL SIGNAL PROCESSING

  • LevelMAX Limiters
  • Input/Output EQ
  • Delay
  • Matrix Mixer
  • Speaker Line Monitoring

Frequency Response ( 8 Ohms, 20 Hz - 20 kHz) +/- 0.25 dB
BLU Link Input Signal to Noise Ratio (A-Weighted) > 108dB
Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz) 0.35%
Voltage Gain 34 dB
Damping Factor (20 Hz to 100 Hz) >5000
Input Impedance (nominal balanced, unbalanced) 10 kOhms, 5 kOhms
Maximum Input Level before Compression +20 dBu
Load Impedance (Stereo/Dual Mode) 2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4 - 16 Ohms; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Required AC Mains (+/- 10%) 100V-240V ~ 50/60 Hz
IEC Power Connector 20A IEC
Dimensions 19" x 3.5" x 19" (48.3cm x 8.9cm x 48.3cm)
Weight 24lbs (10.9kg)