Electro Voice PA 2250T Dual Channel Class AB Commercial Power Amplifier, 2 x 270 watts at 4 ohms, 70V/100V or Low Impedance Operation

Vendor: Electro Voice
Description Electro Voice PA 2250T Dual Channel Class AB Commercial Power Amplifier, 2 x 270 watts at 4 ohms, 70V/100V or Low Impedance Operation The Electro-Voice PA2250T is a rackmount 250W 2-channel power...
$708.80 $886.00
Title

Electro Voice PA 2250T Dual Channel Class AB Commercial Power Amplifier, 2 x 270 watts at 4 ohms, 70V/100V or Low Impedance Operation

The Electro-Voice PA2250T is a rackmount 250W 2-channel power amplifier that is designed with a high-performance output transformer which is great to use for 50V/70V/100V systems or 4-/8-Ohm setups in offices, schools, retail spaces, houses of worship, and more. This amplifier is equipped with a simple, easy-to-use interface that comes with a power switch and indicator LEDs that can be found on the front panel, and the stepped level control and switches for the selectable 50/70/300 Hz high-pass filter and dual/parallel/bridged mode found on the rear at the same time. The Euroblock input and output connectors are all enhanced to provide a easy and quick setup.

  • Efficient performance for low impedance or distributed systems 
  • Ideal for sound reinforcement, paging, and life safety 
  • 250 W per channel for 4 Ω or 70/100 V lines
  • Bridged mono out for 540 W into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting
Weight Net 51.81lbs (23.5kg)
Depth 15.98" (406mm)
Width 19.02" (483mm)
Height 3.46" (88mm)
Amplifier Gain 34.3dB
Channels 2
Continuous Rated Power (1 kHz, THD 1%) 100v 270Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω 270Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 270Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 270Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 135Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 250Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 250Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 250Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 125Watts
Crosstalk < < -75dB
DIM 30 < 0.1%
Frequency Response (-3 dB) 65Hz - 40kHz
Impedance 4/8Ω (70V/100V)
Input Impedance (Balanced) > 20kΩ
Input Sensitivity 0 dBu (775mV) (@ rated output power or voltage, 1kHz)
Intermodulation Distortion (SMPTE) < 0.1%
Network Control (IRIS-Net) No
Number of Channels 2
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 250/125W (70V/100V-250)
Rated output power (*rated load) THD < 1%, 1kHz 270/135W (70V/100V-270)
Signal-to-Noise Ratio (A-weighted) 103dB
Slew Rate 18V/µs (70V-41, 100V-61)
Total Harmonic Distortion < 0.1%