Dynacord DC-PM600-3-MIG, Power Mixer, 4 Mic/Line + 4 Mic/Stereo Line Channels

Vendor: Dynacord
Dynacord DC-PM600-3-MIG, Power Mixer, 4 Mic/Line + 4 Mic/Stereo Line Channels The PowerMate3 8-Channel Powered Mixer from Dynacord features four mic/line, two mic/stereo-USB, and two stereo-line channels. It also has three auxiliary ports,...
$2,299.00
Title

Dynacord DC-PM600-3-MIG, Power Mixer, 4 Mic/Line + 4 Mic/Stereo Line Channels

The PowerMate3 8-Channel Powered Mixer from Dynacord features four mic/line, two mic/stereo-USB, and two stereo-line channels. It also has three auxiliary ports, one of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories. A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 9-band stereo graphic equalizer allows precise tone control for speakers and room matching. The amplifier features 2 x 1000W at 4 Ohms (RMS).

Dynacord DC-PM600-3-MIG Main Features

  • 2 x 1000W Built-In Class-D Amplifiers
  • 4 x Mic/Line Channels
  • 2 x Mic/Stereo-USB Channels
  • 2 x Stereo-Line Channels
  • 3 x AUX Channels
  • Dual 24-Bit Stereo Effects
  • USB Audio Interface
  • 9-Band Stereo Graphic Equalizer
  • Steinberg Cubase software
  • Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage
  • Slim housing protected by a rugged plastic lid, hold by strong snap-in magnets
  • Optional speaker protection allows a limitation of long-term power without giving up dynamics
  • Made in Germany
Channels 4 x Mic/Line
2 x Mic/Stereo-USB
2 x Stereo-Line
Auxiliary 1 x Pre
1 x Post
1 x Pre/Post Switchable
Output Power Max Single Channel, Dynamic-Headroom, IHF-A:
Into 2.66 Ohms: 2 x 1600 W
Into 4 Ohms: 2 x 1250 W
Into 8 Ohms: 2 x 675 W
Max Single Channel, Continuous, 1 kHz, THD = 1%:
Into 2.66 Ohms: 2 x 1350 W
Into 4 Ohms: 2 x 1150 W
Into 8 Ohms: 2 x 650 W
Max Midband, 1 kHz, THD = 1%, Dual Channel:
Into 2.66 Ohms: 2 x 1350 W
Into 4 Ohms: 2 x 1000 W
Into 8 Ohms: 2 x 600 W
Rated, 20 Hz to 20 kHz, THD < 0.5%, Single Channel:
Into 4 Ohms: 2 x 900 W
Into 8 Ohms: 2 x 450 W
Maximum Output Voltage Power Amplifier, 1 kHz, No Load: 74 V RMS
Maximum THD @ 1kHz MBW = 80 kHz:
MIC Input to Master A L/R Outputs, +16 dBu, Typical: < 0.005%
Power AMP Inputs to Speaker L/R Outputs: < 0.075%
DIM 30 Power Amplifier, 3.15 kHz, 15 kHz: < 0.05%
IMD SMPTE Power Amplifier, 60 Hz, 7 kHz: < 0.15%
Frequency Response -3 dB, ref. 1 kHz:
Any Input to Any Mixer Output: 15 Hz to 70 kHz
Any Input to Speaker L/R Output: 20 Hz to 30 kHz
Crosstalk @ 1 kHz Amplifier L/R: < -85 dB
Channel to Channel: < -80 dB
Mute- and Standby-Switch Attenuation: > 100 dB
Fader and FX/AUX/MON-Send Attenuation: > 85 dB
CMRR MIC Input, 1 kHz: > 80 dB
Input Sensitivity All Level Controls in Max Position:
Microphone: -74 dBu (155 µV)
Line (Mono): -54 dBu (1.55 mV)
Line (Stereo): -34 dBu (15.5 mV)
CD (Stereo): -34 dBu (15.5 mV)
Power AMP Inputs: +8 dBu (1.95 V)
Maximum Level Mixing Desk:
Microphone Inputs: 11 dBu
Mono Line Inputs: 31 dBu
Stereo Line Inputs: 31 dBu
All Other Inputs: 22 dBu
All Other Outputs: 22 dBu
Input Impedances Microphone: 2 Kilohms
CD Input: 10 Kilohms
All Other Inputs: > 15 Kilohms
Output Impedances Phones: 47 Ohms
All Other Outputs (Balanced/Unbalanced): 150 Ohms / 75 Ohms
Equivalent Input Noise Microphone Input, A-Weighted, 150 Ohms: -130 dBu
Noise Channel Inputs to Master A L/R Outputs, A-Weighted:
Master Fader Down: -100 dBu
Master Fader 0 dB, Channel Fader Down: -92 dBu
Master Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -82 dBu
Signal / Noise Power Amplifier, A-Weighted, 4 Ohms: 105 dB
Output Stage Amplifier: Class-D
Equalization LO Shelving: ±15 dB / 60 Hz
MID Peaking: ±12 dB / 2.4 kHz
HI Shelving: ±15 dB / 12 kHz
Master EQ 9-Band (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 6.3 kHz, 12 kHz): ±10 dB / Q = 1.5 to 2.5
Filter LO-CUT, Mono Inputs: f = 80 Hz, 18 dB/oct., Switchable
Speaker Processing: LPN, Switchable
Effects Type: Dual Stereo 24/48-Bit Multi-Effects Processors
Effects Presets: 100 Factory + 20 User, Tap-Delay
Remote Control: Footswitch, MIDI
Display 128 x 64 pixels, OLED
Digital Audio Channels: 4 x Inputs / 4 x Outputs
AD/DA Conversion: 24-Bit
Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
PC Interface: USB 2.0, Female Type-B
Peak Display: 6 dB Before Clip
MIDI Connectors 1 x 5-Pin DIN, Input / Output
Power Control Output: Adjustable Longterm RMS Limiter
Protection Mixer Outputs (Relay Controlled): AUX, MON, MASTER A L/R
Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-On Delay, Back EMF
Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Overcurrent, High Temperature
Cooling Continuous Speed-Controlled Fans
Phantom Power Switchable: 48 VDC
Power Requirements SMPS with Auto Range Mains Input: 100 to 240 VAC, 50/60 Hz
Power Consumption At 1/8 Maximum Output Power, 4 Ohms: 450 W
Safety Class I
Ambient Temperature 40 to 105°F / 5 to 40°C
Dimensions 17.3 x 6.4 x 14.3" / 438.8 x 161.7 x 362.5 mm (with Lid)
19 x 5.3 x 12.2" / 483 x 135.8 x 310.3 mm (7 RU, Rackmount)
Weight 19.8 lb / 9 kg (without Lid)
20.9 lb / 9.5 kg (with Lid)