Yamaha EMX2 Powered 10 Channels Mixer

Yamaha EMX2 Powered 10 Channels Mixer

The Yamaha EMX2 Powered mixer is a 10-input mixer with an integrated 500W amplifier, four mic/line inputs, three stereo line inputs, and an independent monitor bus. The EMX2 Powered mixer features a Hi-Z guitar input on channel four and each channel of this EMX2 Powered mixer offers a 3-band EQ for custom tailoring your sound. Channels 1/2 offer XLR inputs, while channels 3/4 include an XLR-1/4" combo jack. Channels 5 through 10 provide 1/4" inputs, with channel 7/8 offering an additional set of stereo RCA inputs. Channel 9/10 also includes a 1/8" stereo mini-jack for connecting portable music players.

The EMX2 Powered mixer includes an integrated feedback suppressor and built-in reverb with SPX series algorithms. Additionally, the EMX2 Powered mixer offers a Master EQ, which produces a single knob to control the level of low end. At the far left, the speech setting cuts low frequencies, while the middle position is neutral for music playback. The far-right setting produces a Bass Boost to improve music playback. There are a number of optional accessories available including a footswitch for reverb bypass, a rack-mount kit, and a microphone stand adapter. The EMX2 Powered mixer ships with a standard IEC power cord.

The Yamaha EMX2 Powered Mixer Product Highlights

• Integrated 500 W Power Amplifier
• Four Mono Mic/Line Inputs
• Three Stereo Inputs
• Hi-Z Input on Channel 4
• Independent Monitor Output
• 3-Band EQ on Each Channel
• Master EQ for Music Playback or Speech
• Integrated Feedback Suppressor
• Built-In Reverb
• Compatible with 4 and 8 Ohm Speakers

Easy Does It

• Output Power - 1 kHz THD+N < 10% (CEA2006): 250 W + 250 W (4 Ohms), 170 W + 170 W (8 Ohms)
  1 kHz THD+N < 1%: 110 W + 110 W (4 Ohms), 110 W + 110 W (8 Ohms)
• Frequency Response - Frequency Response Refer to the nominal output level @ 1 kHz
  Input to Speakers: +1/-4 dB (40 Hz to 20 kHz)
  Input to Monitor Out: +0.5/-1.5 dB (20 Hz to 20 kHz)
• THD + N - Input to Speakers: 0.2% @ 13.8 W (40 Hz to 20 kHz), 0.4% @ 23.2 W (1 kHz)
  Input to Monitor Out: 0.05% @ +10 dBu (20 Hz to 20 kHz), 0.009% @ +20 dBu (1 kHz)
• EIN - Equivalent Input Noise: -115 dBu
• Residual Output Noise - Input to Speakers: -68 dBu (40 Hz to 20 kHz, Master: min) Input to Monitor Out: -99 dBu (20 Hz to 20 kHz, Monitor: min)
• Crosstalk - (1 kHz): -80 dB
• Input Channels - Mono (Mic/Line): 4
                               Stereo: (Line): 3
                               Total: 10
• Output Channels - Speakers: L/R
                                  Monitor Out: L/R
                                  Subwoofer Out
• Bus - Stereo: 1
            Bus: 1
• Pad - Channels 1-4: 26 dB
• Hi-Z Input - Hi-Z Input
• EQ Section - High: 8 kHz +15/-15 dB
                        Mid: 2.5 kHz +15/-15 dB
                        Low: 100 Hz +15/-15 dB
• Audio Level Meter - 6 points (-20, -6, 0, +3, +6, LIMITER)
• Built-in Effects - SPX Algorithm: Reverb 4 programs
• Output Channel Function - Master EQ (Speech to Music)
                                                Feedback Suppressor
• Phantom Power - Channels 1, 2: +30 V
• Footswitch Input - Reverb: Effect mute on/off
• Protection - Load Protection: DC-fault
  Amplifier Protection: Over heat protection, over current protection
• Power - Power Requirements: 100-240 VAC, 50/60 Hz
                Power Consumption: 35 W (Idle) / 90 W (1/8 power)
• Operating Temperature - 32 to 104°F / 0 to 40°C
• Dimensions (W × H × D) - 14.8 x 5.8 x 8.7" / 37.6 x 14.7 x 22.1 cm
• Weight - 9.3 lb / 4.2 kg