Listen Technologies LT-800-072-01 / LT-800-072-01-D Stationary RF Transmitter (72 MHz)

Vendor: Listen Technologies
Listen Technologies LT-800-072-01 / LT-800-072-01-D Stationary RF Transmitter (72 MHz) Variants: LT-800-072-01 - w/o DanteLT-800-072-01-D - w/ Dante Offering outstanding audio clarity and 57 selectable channels, the LT-800 is a perfect RF transmitter...
$829.00 $951.00
Package Inclusions

Listen Technologies LT-800-072-01 / LT-800-072-01-D Stationary RF Transmitter (72 MHz)

Variants:

LT-800-072-01 - w/o Dante
LT-800-072-01-D -
w/ Dante

Offering outstanding audio clarity and 57 selectable channels, the LT-800 is a perfect RF transmitter choice for a wide range of applications, connected to your main audio system, and Dante compatible through the use of the LA-465 Dante adapter which is included in With Dante variant. Dante input or universal analog inputs allow for the use of nearly any audio source including mixers, microphones, MP3 players, and more. The LT-800 broadcasts strong, reliable audio to both belt pack receivers and stationary receivers, ideal for providing listeners with the best possible assistive listening experience.

Audio

Frequency Response 50 Hz - 15 kHz (±3 dB)
Signal-to-Noise Ratio SQ enabled 80 dB, SQ disabled 60 dB
Audio Input 1 Rear panel, one (1) Female XLR or 1/4 in combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1k ohm (line/mic), phantom power +12 VDC
Audio Input 2 Rear panel, two (2) phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k ohm
Audio Processing Compression can be turned on/off, slope internally adjustable from 1:1 to 4:1, default 2:1
Contour Cuts and boosts frequencies above 5 kHz
Distortion < 2% total harmonic distortion (THD) at 80% deviation
Audio Output Input 1 and input 2, mixed output (rear panel), two (2) phono connectors, unbalanced, -10 dBu nominal output level, +15 dBu maximum, impedance 10 ohm
Headphone Output Front panel, one (1) 3.5 mm (0.14 in.) stereo connector, unbalanced, adjustable output level, +3 dBu maximum, impedance 10 ohm

Controls

User Controls Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume controlRear Panel: Input 1 Level, (Line, Mic, Mic-Phantom Power), Input 2 level (-10 / +10 dBu), RF power level (low, mid, high)
Internal Adjustments Compression ratio for audio processor
Programming SQ on/off, process on/off, channel lock

Indicators

LCD Channel designation, lock status, RF power level, programming (front panel)
Audio Input Status LEDs Indicates Input 1, Input 2, and Mix audio levels; 10 segment LED's (8 green, 2 red)
Processing Indicated by a green LED when on (front panel)
Test Tone Red LED illuminates when test tone is enabled.
RF Power Indicated on the LCD (low, mid, high)

RF

Frequency Range 72.025 - 75.950 MHz
Number of Channels 17 wide band, 40 narrow band
Frequency Accuracy ± .005% stability +32º to +122 ºF (0º to +50 ºC)
Antenna Type Various antennas available
Transmitter Stability 50 PPM
Transmission Range Up to 305 m (1,000 ft.)
Antenna Connector BNC, 50 Ohms (Use RG-58 < 100 ft or RG-8 > 100ft)
Output Power 80,000 uV at 3 m
Number of Simultaneous Transmitters Up to 8

Power

Power Supply In line power supply, Listen part number LA-207 (Line cord is determined by the each Country's AC power standards)
Power Supply Input 100-240 VAC, 50-60 Hz, 0.4 A
Power Supply Output 12 VDC, 1.3 A, 15.6 W
Power Supply Connector 0.02 in (5.0 mm) OD, 0.01 in. (2.5 mm) ID, barrel type
Compliance UL, CE, GS, TÜV, RoHS

Physical

Width 21.5 cm (8.50 in.)
Height 4.5 cm (1.75 in.)
Depth 23 cm (9.13 in.)
Color Black with grey silk screening
Unit Weight with Power Supply 1.6 kg (3.5 lbs.)
Shipping Weight 2.7 kg (6.0 lbs.)
Rack Mounting One (1) rack space height, 1/2 rack space wide. One (1) or two (2) transmitters can be mounted in one rack space, optional rack mount (LA-326)
Weight 1.2 kg (2.6 lbs.)