Williams Sound IR SY12 D IR+ Secure with Dante
Vendor: Williams Sound
Williams Sound IR SY12 D IR+ Secure with Dante IR+ system packed with all the tools needed for a secure, functioning system. IR M1 infrared modulator(2) IR E4 emitters(5) IR RX20 receiversCHG 520...
Available

Williams Sound IR SY12 D IR+ Secure with Dante
IR+ system packed with all the tools needed for a secure, functioning system.
IR M1 infrared modulator
(2) IR E4 emitters
(5) IR RX20 receivers
CHG 520 charger
(2) NKL 001 Neckloops
MLB 003 Linking bar
(2) BKT 024 brackets
IDP 008 Accessibility Signage
IR M1
Dimensions: | 19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm) |
Weight: | 5.2lb. (2.4 kg) |
Color: | Black |
Rack Mount: | Single Rack Unit |
Power Supply: | International Desktop Supply Input: 36 W, 110-240 VAC 50-60 Hz Output: +48VDC, 0.75A center-positive |
Power Switch: | Rocker switch with LED |
Signal to Noise Ratio: | 67 dB (typical) |
Modulation: | FM Wideband, +50kHz deviation, 50uS pre-emphasis |
Carrier Frequency: | Selectable, 2.3/2.8 or 3.3/3.8MHz |
Frequency Response: | 40 to 16,000Hz, +1 dB, -3dB, electrical response |
Total Harmonic Distortion: | Less than 2%, electrical response |
Audio Processor Functions: | DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
Auto Carrier Shut-Off: | Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
Infrared Test LED: | Dual IR LED for receiver testing, monitoring, and audio signal testing. |
Audio Input: | (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
Dante: | Optional |
Internal Test Tone: | 400 Hz internal test tone selectable as audio input source for setup and diagnostics |
Remote Configuration: | Available through embedded website |
Headphone Output: | (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
Emitter Output Jack: | Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Modulator, 90 days on accessories |
IR E4
Dimensions: | 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm) |
Weight: | 0.8 lb (362 g) |
Color: | Black |
Power: | 48 VDC supplied by IR M1 via CAT 5e cable. |
Coverage Area: | Up to 18,000 square feet in single channel mode |
Connectivity: | +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Emitter; 90 days on accessories |
CHG 520
Dimensions: | 12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm) |
Weight: | 13.6 lbs |
Color: | Black metal and plastic |
Power Supply Input: | 120 VAC |
Power Supply: | 100-240V / 12VDC TFP 043 |
Unit Capacity: | 5 Units |
Indicators: | Individual Charging Indicators: Red LEDs |
Warranty: | 1 year (90 day warranty on cables and power supply) |
Approvals: | WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI |
IR RX20
Weight: | 1.6 oz |
Material and Color: | IR Transparent polycarbonate, black |
Battery Type: | LiPo |
Battery Life: | 8 hours |
Battery Charger: | CHG 520 |
Operating Temp: | 32-122° F (0-50° C) |
Range: | Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter |
Operating Frequency: | 2.3 MHz or 2.8 MHz or stereo |
Frequency Response: | 100 Hz to 12 kHz, ± 3 dB |
Signal to Noise Ratio: | 60 dB at 10 m |
Controls: | Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power |
Acoustic Output: | 120 dB MAX SSPL90 with 2 cc coupler |
Compatibility: | Compatible with 2.3 MHz and 2.8 MHz IR transmitters |
Headphone Jack: | 3.5mm stereo |
Ear pads: | EAR 089 |
Approvals: | CE, RoHS, FCC, Canada, RCM, VCCI, WEEE |
Warranty: | 5 years (90 days on battery) |
Warranty 2 Years
Related Product
Prev
Next
Sennheiser RCS IE, Headphone cable for IE 80 S - 1.2 m - microphone and smart remote.
Descriptions Sennheiser RCS IE, Headphone cable for IE 80 S - 1.2 m - microphone and smart remote. The Sennheiser...
$49.95
Sennheiser HDE 2020-D-II US Tour guide 2020 stethophone receiver, ISM band (926-928 MHz)
Sennheiser HDE 2020-D-II US Tour guide 2020 stethophone receiver, ISM band (926-928 MHz) Sennheiser HDE2020-D-II-US 6-Channel RF Stethoset Receiver from Sennheiser is a wireless...
$439.00
$516.00
Williams Sound MIC 400, Unidirectional headband microphone for use with Digi-Wave DLT 400 transceiver only. (MIC 100 + ADP 017)
Descriptions Williams Sound MIC 400, Unidirectional headband microphone for use with Digi-Wave DLT 400 transceiver only. (MIC 100 + ADP...
$139.00
Shure MXCIC "Interpretation console with color display, 3 outgoing language channels, 8 relay channels, integrated loudspeaker"
Shure MXCIC "Interpretation console with color display, 3 outgoing language channels, 8 relay channels, integrated loudspeaker" The MXCIC Interpreter Console...
$1,715.00
$2,400.00
Williams Sound EAR 010 Replacement Earpad
Williams Sound EAR 010 Replacement Earpad Replacement earpad for EAR 008. Wide-range earphone. .01 lbs. Specifications Not Specified by the...
$6.00
Williams Sound EAR 008 Over-ear, hook earphone
Williams Sound EAR 008 Over-ear, hook earphone Wide-range Earphone. Hangs on outside of ear. Excellent sound quality. 32 Ω, mono....
$28.00
Williams Sound FMP 060 26-slot Foam insert
Williams Sound FMP 060 26-slot Foam insert Foam insert for CCS 056 26. 26 slots for PPA T46, FM, IR...
$130.00
Williams Sound FMP 057 15-slot Foam insert
Williams Sound FMP 057 15-slot Foam insert Foam insert for CCS 056 S.15 Slots. Dimensions:18.25″ x 12.5″ x 3″ Specifications...
$100.00
Williams Sound FMP 056 35-slot Foam insert
Williams Sound FMP 056 35-slot Foam insert
Foam insert for 056 35. 35 slots.
Specifications
Not Specified by the manufacturers
$130.00
Williams Sound FMP 055 40-slot Foam insert for Digi-Wave
Williams Sound FMP 055 40-slot Foam insert for Digi-Wave Foam insert for CCS 056 DW 40. 40 Slots. Specifications Not...
$130.00
Williams Sound FMP 054 11-slot Foam insert for Digi-Wave
Williams Sound FMP 054 11-slot Foam insert for Digi-Wave Foam insert for CCS 056 DW 11. 11 slots Specifications Not...
$100.00
Williams Sound FMP 039 Foam insert for CCS 029 DW (5-slot)
Williams Sound FMP 039 Foam insert for CCS 029 DW (5-slot) 5-slot foam insert for CCS 029 DW small briefcase....
$32.00
Williams Sound FMP 036 Foam insert for CCS 029
Williams Sound FMP 036 Foam insert for CCS 029 5-slot foam insert for CCS 029 small briefcase. Specifications Not Specified...
$36.00
Williams Sound CCS 056 S Williams Sound CCS 056 S
Williams Sound CCS 056 S Williams Sound CCS 056 S Large Water resistant carry case. 15 slot foam insert for...
$360.00
Williams Sound CCS 056 DW 40 Carry Case for Digi-Wave (40 slots)
Williams Sound CCS 056 DW 40 Carry Case for Digi-Wave (40 slots) Large Water resistant carry case. 40 slot foam...
$360.00
Williams Sound CCS 056 DW 11 Carry Case for Digi-Wave (11 slots)
Williams Sound CCS 056 DW 11 Carry Case for Digi-Wave (11 slots) Large Water resistant carry case. 11 slot foam...
$335.00