Williams Sound IR SY22 D Large-area Dante Infrared System with Bodypack Receivers
Vendor: william
Williams Sound IR SY22 D Large-area Dante Infrared System with Bodypack Receivers Commercial-grade, large-area Dante infrared system with IR+ transmitter, 4 emitters and array. System Includes (1) IR M1 D infrared modulator with...
Available

Williams Sound IR SY22 D Large-area Dante Infrared System with Bodypack Receivers
Commercial-grade, large-area Dante infrared system with IR+ transmitter, 4 emitters and array.
System Includes
(1) IR M1 D infrared modulator with Dante input
(4) IR E4 emitters,
(1) IR A4 array
(4) WIR RX22-4N receivers
(2) BAT KT6 dual bay chargers
(4) EAR 022 earphones
(1) IDP 008 ADA wall plaque
IR M1
Dimensions: | 19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm) |
Weight: | 5.2lb. (2.4 kg) |
Color: | Black |
Rack Mount: | Single Rack Unit |
Power Supply: | International Desktop Supply Input: 36 W, 110-240 VAC 50-60 Hz Output: +48VDC, 0.75A center-positive |
Power Switch: | Rocker switch with LED |
Signal to Noise Ratio: | 67 dB (typical) |
Modulation: | FM Wideband, +50kHz deviation, 50uS pre-emphasis |
Carrier Frequency: | Selectable, 2.3/2.8 or 3.3/3.8MHz |
Frequency Response: | 40 to 16,000Hz, +1 dB, -3dB, electrical response |
Total Harmonic Distortion: | Less than 2%, electrical response |
Audio Processor Functions: | DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
Auto Carrier Shut-Off: | Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
Infrared Test LED: | Dual IR LED for receiver testing, monitoring, and audio signal testing. |
Audio Input: | (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
Dante: | Optional |
Internal Test Tone: | 400 Hz internal test tone selectable as audio input source for setup and diagnostics |
Remote Configuration: | Available through embedded website |
Headphone Output: | (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
Emitter Output Jack: | Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Modulator, 90 days on accessories |
IR E4
Dimensions: | 7.5” (W) x 1.4” (H) x 3.6” (D) (19.1 cm x 3.6 cm x 9.1 cm) |
Weight: | 0.8 lb (362 g) |
Color: | Black |
Power: | 48 VDC supplied by IR M1 via CAT 5e cable. |
Coverage Area: | Up to 18,000 square feet in single channel mode |
Connectivity: | +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Emitter; 90 days on accessories |
CHG 520
Dimensions: | 12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm) |
Weight: | 13.6 lbs |
Color: | Black metal and plastic |
Power Supply Input: | 120 VAC |
Power Supply: | 100-240V / 12VDC TFP 043 |
Unit Capacity: | 5 Units |
Indicators: | Individual Charging Indicators: Red LEDs |
Warranty: | 1 year (90 day warranty on cables and power supply) |
Approvals: | WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI |
IR RX20
Weight: | 1.6 oz |
Material and Color: | IR Transparent polycarbonate, black |
Battery Type: | LiPo |
Battery Life: | 8 hours |
Battery Charger: | CHG 520 |
Operating Temp: | 32-122° F (0-50° C) |
Range: | Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter |
Operating Frequency: | 2.3 MHz or 2.8 MHz or stereo |
Frequency Response: | 100 Hz to 12 kHz, ± 3 dB |
Signal to Noise Ratio: | 60 dB at 10 m |
Controls: | Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power |
Acoustic Output: | 120 dB MAX SSPL90 with 2 cc coupler |
Compatibility: | Compatible with 2.3 MHz and 2.8 MHz IR transmitters |
Headphone Jack: | 3.5mm stereo |
Ear pads: | EAR 089 |
Approvals: | CE, RoHS, FCC, Canada, RCM, VCCI, WEEE |
Warranty: | 5 years (90 days on battery) |
Warranty 2 Years
Related Product
Prev
Next
Sennheiser RCS IE, Headphone cable for IE 80 S - 1.2 m - microphone and smart remote.
Descriptions Sennheiser RCS IE, Headphone cable for IE 80 S - 1.2 m - microphone and smart remote. The Sennheiser...
$49.95
Sennheiser HDE 2020-D-II US Tour guide 2020 stethophone receiver, ISM band (926-928 MHz)
Sennheiser HDE 2020-D-II US Tour guide 2020 stethophone receiver, ISM band (926-928 MHz) Sennheiser HDE2020-D-II-US 6-Channel RF Stethoset Receiver from Sennheiser is a wireless...
$439.00
$516.00
Williams Sound MIC 400, Unidirectional headband microphone for use with Digi-Wave DLT 400 transceiver only. (MIC 100 + ADP 017)
Descriptions Williams Sound MIC 400, Unidirectional headband microphone for use with Digi-Wave DLT 400 transceiver only. (MIC 100 + ADP...
$139.00
Shure MXCIC "Interpretation console with color display, 3 outgoing language channels, 8 relay channels, integrated loudspeaker"
Shure MXCIC "Interpretation console with color display, 3 outgoing language channels, 8 relay channels, integrated loudspeaker" The MXCIC Interpreter Console...
$1,715.00
$2,400.00
Williams Sound EAR 010 Replacement Earpad
Williams Sound EAR 010 Replacement Earpad Replacement earpad for EAR 008. Wide-range earphone. .01 lbs. Specifications Not Specified by the...
$6.00
Williams Sound EAR 008 Over-ear, hook earphone
Williams Sound EAR 008 Over-ear, hook earphone Wide-range Earphone. Hangs on outside of ear. Excellent sound quality. 32 Ω, mono....
$28.00
Williams Sound FMP 060 26-slot Foam insert
Williams Sound FMP 060 26-slot Foam insert Foam insert for CCS 056 26. 26 slots for PPA T46, FM, IR...
$130.00
Williams Sound FMP 057 15-slot Foam insert
Williams Sound FMP 057 15-slot Foam insert Foam insert for CCS 056 S.15 Slots. Dimensions:18.25″ x 12.5″ x 3″ Specifications...
$100.00
Williams Sound FMP 056 35-slot Foam insert
Williams Sound FMP 056 35-slot Foam insert
Foam insert for 056 35. 35 slots.
Specifications
Not Specified by the manufacturers
$130.00
Williams Sound FMP 055 40-slot Foam insert for Digi-Wave
Williams Sound FMP 055 40-slot Foam insert for Digi-Wave Foam insert for CCS 056 DW 40. 40 Slots. Specifications Not...
$130.00
Williams Sound FMP 054 11-slot Foam insert for Digi-Wave
Williams Sound FMP 054 11-slot Foam insert for Digi-Wave Foam insert for CCS 056 DW 11. 11 slots Specifications Not...
$100.00
Williams Sound FMP 039 Foam insert for CCS 029 DW (5-slot)
Williams Sound FMP 039 Foam insert for CCS 029 DW (5-slot) 5-slot foam insert for CCS 029 DW small briefcase....
$32.00
Williams Sound FMP 036 Foam insert for CCS 029
Williams Sound FMP 036 Foam insert for CCS 029 5-slot foam insert for CCS 029 small briefcase. Specifications Not Specified...
$36.00
Williams Sound CCS 056 S Williams Sound CCS 056 S
Williams Sound CCS 056 S Williams Sound CCS 056 S Large Water resistant carry case. 15 slot foam insert for...
$360.00
Williams Sound CCS 056 DW 40 Carry Case for Digi-Wave (40 slots)
Williams Sound CCS 056 DW 40 Carry Case for Digi-Wave (40 slots) Large Water resistant carry case. 40 slot foam...
$360.00
Williams Sound CCS 056 DW 11 Carry Case for Digi-Wave (11 slots)
Williams Sound CCS 056 DW 11 Carry Case for Digi-Wave (11 slots) Large Water resistant carry case. 11 slot foam...
$335.00