Audio Technica ATW-1101/H, ATW-1101/H

Vendor: Audio Technica
Descriptions Audio Technica ATW-1101/H, ATW-1101/H Audio Technica ATW-1101/H is a system 10 and a digital wireless headworn microphone solution for drummers, keyboards, dancers, instructors and others that use their hands during performance. The...
$349.95
Title

Audio Technica ATW-1101/H, ATW-1101/H

Audio Technica ATW-1101/H is a system 10 and a digital wireless headworn microphone solution for drummers, keyboards, dancers, instructors and others that use their hands during performance. The set of the Audio Technica ATW-1101/H includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the PRO 8HEcW headworn microphone. Audio Technica ATW-1101/H uses a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Additionally, the Audio Technica ATW-1101/H is built for expandability, so you can use up to eight systems simultaneously.

Audio Technica ATW-1101/H Product Features

  • Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems
  • Flexible, pivoting boom allows mic to be worn on left or right side
  • Headband cushions for support and comfort
  • Level controls on transmitter and receiver
  • Pair indicator illuminates on receiver when synced with transmitter
  • AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping
System Specifications
Operating Frequencies  2.4 GHz ISM band
Dynamic Range  >109 dB (A-weighted), typical
Total Harmonic Distortion  <0.05% typical
Operating Range  30 m (100') typical
Operating Temperature Range  0 to 40° C (32 to 104° F)
Frequency Response  20 Hz to 20 kHz
Audio Sampling  24 bit, 48 kHz
Receiver
Receiving System  Diversity (frequency/time/space)
Output Connections  1x XLR, balanced
 1x 1/4" (6.3 mm), unbalanced
Maximum Output Level  Balanced: 0 dBV
 Unbalanced: +6 dBV
Power Supply  100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive,   switched mode external power supply
Dimensions  7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm)
Weight  10.2 oz (290 g)
Transmitter
RF Output Power  10 mW
Spurious Emission  Following federal and national regulations
Input Connections  1x 4-pin locking connector

 Wiring:
 Pin 1: GND
 Pin 2: INST INPUT
 Pin 3: MIC INPUT
 Pin 4: DC BIAS +9V
Batteries  2x 1.5V AA (not included)
Battery Life  >7 hours (alkaline)
Dimensions  2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm)
Weight  3.5 oz (100 g), without batteries
Microphone
Element  Dynamic
Polar Pattern  Hypercardioid
Frequency Response  200 Hz - 18 kHz
Open Circuit Sensitivity  -55 dB (1.7 mV) re 1V at 1 Pa
Impedance  600 ohms
Connector  Locking 4-Pin HRS connector
Cable Length  55" (1.4 m)
Dimensions  4.72" (120.0 mm), headset, nominal at widest point
 3.17" (80.5 mm), flexible boom
 0.80" (20.4 mm), microphone diameter
Weight  2.1 oz (60 g)