Bose ControlSpace EP22-D 2 In x 2 Out Dante Endpoint

Bose ControlSpace EP22-D 2 In x 2 Out Dante Endpoint

Bose ControlSpace EP22-D 2 In x 2 Out Dante Endpoint is a 2in/2out, designed for cost-effective and convenient way to line/mic audio output and input channels to a Dante-based networked audio system. The PoE power capability and small form factor of the EP22-D is making it easy to put Dante connectivity wherever it’s needed whether it is near the audio source or sink it can still eliminate the costly and interference-prone analog wiring. Control and setup, including the line/mic input gain, phantom power and output gain, as well as Dante audio routing are all integrated in ControlSpace Designer.

Key Features

• Small form factor, can be unobtrusively located near analog devices
• Integrated discovery, routing, configuration and control using
ControlSpace Designer™ software
• Dual power options (DC or PoE) means the EP22-D will work with
either standard or PoE Ethernet switches
• Three input gain settings for common line and microphone sources.
Channel gain is individually adjustable via ControlSpace Designer
software
• +24VDC Phantom power
• Separate analog output gains to accommodate both consumer and
professional line-level requirements

Technical Specifications

Audio Inputs
Input Channels Two (2) analog, balanced microphone/line level
Connectors Two (2) 3.81 mm Euroblock, 3-pin
Phantom Power +24VDC, software selectable per input
Gain Settings 0 / +25 / +40 dB, software selectable
Input Impedance > 1.8 kΩ at any gain setting
Equivalent Input Noise -115 dBu (at +40 dB gain)
Maximum Input Level +12 dBu (at 0 dB gain)

Audio Outputs
Output Channels Two (2) analog, balanced line-level,
with automatic muting on loss of Dante signal
Connectors Two (2) 3.81 mm Euroblock, 3-pin
Output Gain 0 / +10 dB, software selectable
Output Noise < –90 dBu @ 0 dB gain
Maximum Output Level +12 dBu
Output Impedance 200 ohms (100 ohms unbalanced)

Software Application
ControlSpace® Designer™ software v4.2 or later