JBL CSM-32 3 x 2 Stereo/Mono Public Address Mixer

Vendor: JBL
Description JBL CSM-32 3 x 2 Stereo/Mono Public Address Mixer The JBL® Commercial CSM-32 is offering mono operation or full stereo, fixed I/O, flexible control and routing of multiple audio sources, pre-configured architecture,...
$670.00 $893.96
Title

JBL CSM-32 3 x 2 Stereo/Mono Public Address Mixer

The JBL® Commercial CSM-32 is offering mono operation or full stereo, fixed I/O, flexible control and routing of multiple audio sources, pre-configured architecture, simple front-panel configuration and control without the need for a computer, compatibility with the CSPM paging microphones, optional duplication of audio channels to another device via a Cat5 cable and compatibility with the CSR wall controllers.

The JBL CSM-32 also features stereo music inputs with clip LEDs and gain control, and two stereo outputs with dedicated subwoofer and active crossovers outputs.

For music override purpose there are two additional inputs that are also provided. The first one is a line input that allows high-priority routing to all zones, which is ideal for alarms. The another one is a mic input with gain control and phantom power whihc are allowing page steering to different zones, ducking the music by a user-configurable amount.

For the connection of a music-only mono output, an additional transformer-isolated mono output is also provided making it ideal for music-on-hold systems.

Dedicated controls for global mic EQ and for music EQ per zone are allowing the frequency content of each input type to be independently customized. LevelGuard™ is provided, in each output channel, for retaining consistent volumes between the various inputs, and AutoWarmth™ is also provided for ensuring full idelity at all zone volume levels.

Zone Remote ports 1 and 2 facilitate connection of the CSR wall controllers, which can provide volume control and/or source selection in each output zone. Mic level per zone, Source select per zone and music level per zone can also be controlled on the front panel. For additional control, two logic inputs facilitate page steering and music muting via contact closure.

Two RJ-45 Link ports allow multiple CSM devices to be linked to increase the number of output zones. Linking CSM devices shares the inputs from the main devices over Cat5 cable and eliminates the need for Y-cables.

An included security plate can be placed over the front panel controls to avoid uninvited changes to a commissioned system.

Features

  • 3 Stereo Inputs
  • 1 Mic Input
  • 1 Line Input for Priority Audio
  • 2 Stereo Output with Dedicated Subwoofer Output
  • 1 Mono Isolated Output for Music-On-Hold System
  • Quick and Simple Configuration via Front/Rear Panel Controls
  • Digital Processor with Analog-Style Control
  • Music EQ per Zone
  • Global Mic EQ
  • AutoWarmth™ and LevelGuard™
  • Optional CSR-3SV wall controller provides source selection and volume control
  • Optional CSR-V wall controller provides volume control
  • Contact Closure Control
  • Link Bus for Input Sharing
  • Security Plate for Front Panel Lockout (included)
Line Inputs
Type 3 x stereo, unbalanced RCA connectors
Nominal Sensitivity -10 dBV
Input Impedance 20 kΩ
Maximum Input +12 dBu
Equalization Bass ±10 dB @ 80 Hz 
Treble ±10 dB @ 8 kHz, 6 dB/octave shelf
Mic
Type 1 x balanced, 0.2" (5.08 mm) Euroblock connector
Input Impedance 2 kΩ
Noise EIN <117 dB, 150 Ω, DSP band-limited 120 to 8,0000 Hz, BW24
Maximum Input +20 dBu
Equalization Bass ±6 dB @ 250 Hz, Treble ±6 dB @ 2 kHz, 6 dB/octave shelf
CMRR >40 dB, typically >55 dB @ 1 kHz
Preamp Overall Gain +30 dB to +60 dB adjustable
Phantom Power +48 VDC , 10 mA
Output
Type 2 x stereo (Left, Right, Sub) balanced 1/8" (3.5 mm), Euroblock connector
Output Impedance 120 Ω balanced
Maximum Output Level +20 dBu
Crossover Frequencies
Left and Right in: 125 Hz high-pass (BW24) 
Sub in: 125 Hz low-pass (BW24) 
Left and Right out: 20 to 20,000 Hz 
Sub out : 20 to 20,000 Hz (mono summed)
LED INDICATORS Source inputs: 
Signal present LED (turns on at -20 dBu) 
Signal clip LED (turns on at +10 dBu) 

Mic input: 
Signal present LED (turns on at -20 dBu) 
Signal clip LED (turns on at +18 dBu)
System Performance
Frequency Response 20 to 20,000 Hz, ±0.1 dB
Dynamic Range 104 dB, A-weighted, 20 to 20,000 Hz
Converter Mic input implements dbx Type IV conversion system
Sample Rate 48 kHz
Crosstalk >75 dB
THD & Noise 0.005% typical at +4 dBu, 20 to 20,000 Hz, 0 db gain
Rear Panel Connections
Direct Inputs 1 x Balanced, 1/4" (5.08 mm) Euroblock connector 
Input impedance: 10 kΩ 
Maximum input: +20 dBu 
Frequency response: 20 to 20,000 Hz
Mute 1 x 2-pin 1/4" (5.08 mm) Euroblock connector 
Connecting the pins mutes all source inputs, does not mute mic input.
Paging 1 x 2-pin 1/4" (5.08 mm) Euroblock connector 
Connecting zone pins to ground assigns page to that respective zone
Link Source: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9' (2.4 m) 
Main: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9' (2.4 m)
USB 1 x USB Type B port for firmware updates
General
Power Consumption 10 W
Power Requirements 100 to 240 V thermal fuse in external transformer
Rack Mountable Yes with included brackets
Dimensions (H x W x D) 19.0 x 1.8 x 7.0" (48.3 x 4.6 x 17.8 cm)
Weight 5.3 lb (2.4 kg)