DBX 12x6 Digital Zone Processor 1260m

DBX 12x6 Digital Zone Processor 1260m 

The ZonePRO 1260m 12x6 Digital Zone Processor designed by DBX can distribute up to twelve audio sources across six mono output zones. The included software will be allowing you to adapt the input/outputs quickly to fit your needs. The ZonePRO 1260m features an interactive front panel with an LCD display, comprehensive signal metering, user-specified controls, and paging broadcast buttons. The 1260m will suit a banquet hall or house of worship with versatile routing and plentiful connectivity.

The ZonePRO 1260m's pre-configured architecture keeps the input/output addresses simple and fixed. It is having six balanced Euroblock mic/line inputs with gain control, four mono-summed unbalanced RCA input pairs, and an S/PDIF input for up to two channels of digital audio. The DBX 1260m’s six zones output from balanced, line-level Euroblock connectors.

Your audio system can be controlled and fine-tuned in the ZonePRO Designer software once the analog cables are connected from your Windows-based PC. The output zones all have individual tone controls, including AutoWarmth and one DSP insert, for optimally tuning the speaker system to the room. For making the most of each source, the ZonePRO 1260m also has independent EQ and two selectable DSP inserts for each of the 12 inputs.

Dbx 1260m Specs

• Front Panel: Six-segment Lightpipe output meters from -30 to +20 dBu
  Output threshold meters
  LCD display shows information on source, page steering, zone volume, and mute
• Inputs: Euroblock mic/line x6
  Unbalanced, mono-summed RCA input pairs x4
  S/PDIF 2 channel input x1
• Input Impedance: Euroblock:
  >50kΩ balanced
  >25kΩ unbalanced
  RCA:
  >25kΩ unbalanced
• Phantom Power: +15VDC
• Maximum Input Level: +20dBu mic/line, +12dBu RCA
• CMRR: > 40dB, typically >55db @ 1kHz
• Mic Pre Gain: 30 to 60 dB
• Mic Input Noise (E.I.N.): < -118 dBu, 22Hz-22kHz, 150Ω source impedance
• Outputs: Balanced, RF filtered Euroblock x6
• Output Impedance: 120Ω balanced
  60Ω unbalanced
• Maximum Output Level: +20 dBu
• A/D Conversion: dbx Type IV conversion system
  
  Dynamic range line:
  >113dB, A-weighted, >110dB unweighted
  
  Type IV dynamic range:
  >119dB, A-weighted, 22kHz BW
  >117dB, unweighted, 22kHz BW
• Sample Rate: 48 kHz
• D/A Conversion: Dynamic range:
  112dB A-weighted, 109dB unweighted, 22kHz BW
• DSP Effects: Available on Input Inserts:
  Automatic gain control
  Notch filter
  Compressor
  Gate
  De-esser
  Advanced feedback suppression
  
  Available on Output Inserts:
  Automatic gain control
  Ambient noise compensation
  AutoWarmth
  Compressor
  Limiter
• Dynamic Range: >110dB A-weighted
  >107dB unweighted
• THD + N: 0.003% typical at +4dBu, 1kHz, 0dB gain
• Frequency Response: 20 - 20,000 Hz, +/- 0.5dB
• Crosstalk: Interchannel: >80dB typical
  Input to Output: >80dB
• Propagation Delay: 0.8 msec
• Computer Connectivity: Ethernet RJ45 x1
  RS-232 serial port x1
• Operating Systems Supported: Windows 2000/XP/Vista/7
  No 64-bit support
• Remote Control Input: RJ-45 x2
  Up to 6 ZC-series remotes can be connected to each input
  
  Wired in series: supports total distance of 300 ft (91.4 m) of CAT 5 cable
  Wired in parallel using ZC-BOB: up to 1,000 ft (304.8 m) each
• Operating Voltage: 100-240 VAC, 50/60 Hz
• Power Consumption: 27 watts
• BTU: <92.13
• Dimension (D x W x H): 1U rackmount: 7.75" x 19" x 1.75" (19.69 x 48.26 x 4.45 cm)
• Weight: 6.2 lbs (2.81 kg)

Packaging Info

• Package Weight: 8.8 lb
• Box Dimensions (LxWxH): 22 x 11.5 x 3.5"