Lectrosonics SPNDNT DIGITAL MATRIX ROUTER FOR DANTE AND AVB

Vendor: Lectrosonics
Description Lectrosonics SPNDNT DIGITAL MATRIX ROUTER FOR DANTE AND AVB In essence, the Lectrosonics SPNDNT is a professionally designed full function DSP mixer and processor like other ASPEN models except that instead of analog...
$3,820.00
Title

Lectrosonics SPNDNT DIGITAL MATRIX ROUTER FOR DANTE AND AVB

In essence, the Lectrosonics SPNDNT is a professionally designed full function DSP mixer and processor like other ASPEN models except that instead of analog I/O ports, it comes using digital network Dante ports. The processor is made for combining Dante networked digital audio that comes along with the ASPEN digital matrix for expanding the signal routing options. The on-board Audinate® Brooklyn II module functions as a native Dante device with the use of standard ethernet or AVB compliant switches.

The processor also comes capable of handling the clock synchronization for the ASPEN equipment and the Dante network. If the processor is the Dante master, it is made for generating the clock signal for the network and the ASPEN rack. If the processor is a Dante slave, it is capable of picking up the network clock and passes it on to the ASPEN system below it. Multiple Dante equipped devices will automatically discover one another and configure the Master/Slave relationship.

Redundancy, which is required in some applications, is accomplished by connecting to a secondary network that is capable to duplicate real-time audio traffic. If the primary network is failing for any reason, the secondary network’s audio continues without losing even a single sample.

  • Connects Dante™ networked audio with ASPEN processors
  • Up to 32 inputs and 32 outputs from the Dante network operate as native inputs and outputs in the
    ASPEN digital matrix
  • Low latency, tightly synchronized transport of uncompressed audio over IP networks using
    off the shelf switches
  • Simplified configuration management includes easy to use Dante features like automatic device discovery
    and plug and play networking
  • Gigabit Ethernet transport
  • AVB Support
  • Redundancy via secondary network
Digital Inputs 32 via Ethernet
Digital Outputs 32 via Ethernet
Monitor Output 1x 1/4" (6.35 mm) headphone jack
Signal Source: Any of the 48 final mixes
Output Power: 50 mW (
Matrix Access 32 inputs from Dante matrix
48 mixes in ASPEN matrix
Input Processing Gain: -69 to 20 dB in 1 dB increments
Delay: .5 to 100 ms in .5 ms increments
Output Processing Gain: -69 to 20 dB in 1 dB increments
Delay: .5 to 250 ms in .5 ms increments
Crosspoint Mixing Modes Auto
Direct
Override
Background
Phantom
Signal Generator Swept Sine: Modes: single sweep, continuous sweep
Waveforms: Sawtooth (up or down), triangle
Sweep Rate: Linear, logarithmic
Parameters: Start frequency, stop frequency, level (dBu), sweep time (sec)
White Noise: Parameter: level (dBu)
Pink Noise: Parameter: level (dBu)
Tone (Sine Wave): Parameter: level (dBu), frequency
Power Requirement 100-240 VAC, 50/60 Hz
Power Consumption 15 W
Dimensions (L x W x H) 1.75 x 19.00 x 7.70" (44.4 x 482.0 x 195.0 mm)
Weight 3.64 lb (1.65 kg)