Community R.5-96MAX (Gray) / R.5-96MAXB (Black) Full-Range 2-Way 12-Inch High Output 90 X 60 All Weather Speaker

Community R.5-96MAX (Gray) / R.5-96MAXB (Black) Full-Range 2-Way 12-Inch High Output 90 X 60 All Weather Speaker

The Community R.5-96MAX for Gray and R.5-96MAXB for Black, is a professionally designed two-way, full-range loudspeaker system carefully created for providing high quality voice and music reproduction in applications that are requiring extreme weather resistance. It is professionally designed capable to withstand long-term exposure to tough, environmental conditions and for providing high output performance.

The R.5-96MAX comes with a 1.4-inch (36 mm) exit HF compression driver and a 12-inch (305 mm) cone 600W neodymium LF driver. The HF assembly is made coaxially mounted along with the LF driver that allows  the 90°x 60° coverage along with low distortion. The system has been designed capable of providing a flat response along with slightly rising HF.

The R.5-96MAX is possible to act as both a musical entertainment loudspeaker and a voice PA loudspeaker all at the same time. Each system is backed by Community’s five-year product warranty and fifteen-year enclosure warranty

Features

• Low-distortion, high-quality musicality, excellent speech intelligibility in a compact enclosure
• High sensitivity, high output (130 dB max)
• Weather-resistant, roto-molded UV resistant enclosure
• Weather-resistant grille and drivers, and moisture-sealed crossover
• Corrosion-resistant zinc-rich epoxy dual-layer powder-coated steel grille and yoke
• Integral mounting points
• Five-year product warranty / Fifteen-year enclosure warranty

• System:
• Loudspeaker Type: Full-range, two-way, coaxial, weather-resistant
• Operating Range*: 70 Hz to 20 kHz (-10 dB)
• Frequency Response*: 95 Hz to 20 kHz (-3 dB)
• *Operating range and frequency response parameters are stated with DSP equalization applied.
• Max Input Ratings:
• 600W RMS, 1200W Program
• 69 volts RMS, 138 volts momentary peak
• Maximum Output**:
• without EQ***: 130 dB (136 dB Peak)
• with EQ****: 129 dB (135 dB Peak)
• **Calculated based on power rating and sensitivity, exclusive of power compression.
• ****Recommended equalization as published in the Community Loudspeaker Library within Community's Resyn™ software.
• Sensitivity (1 W / 1m) Free Space SPL***,†:
• 102 dB (125 Hz - 10 kHz)
• 103 dB (250 Hz - 4 kHz)
• ***Raw driver or system response prior to applying any filters for frequency response or power response correction.
• †Free field anechoic sensitivity, calculated using input voltage that would produce 1 W at the nominal impedance.
• Nominal Impedance: 8 Ω, 4.8 Ω @ 200 Hz minimum
• Nominal Beamwidth (-6 dB): 90° x 60°, 1.6 kHz to 10 kHz
• Axial Q / DI: 13.8/11.4, 1.6 kHz to 10 kHz
• Crossover Frequency: 900 Hz
• Recommended Processing‡: DSP with CONEQ™ power response correction
• ‡Community's dSPEC226 loudspeaker signal processor DSP and Resyn™ software include CONEQ™ 1000 point FIR filter power response correction filters within the preconfigured speaker file for this model of loudspeaker.
• Recommended Amplifier: 1200 W to 1800 W at 8 Ω
• Transducers:
• LF: 1x 12" inherently weather-resistant cone with neodymium motor and aluminum demodulation ring
• HF: 1x 1.4" exit compression, 2.87" Voice coil
• Physical:
• Input Connection: 12ft (3.6m) SJOW #16 gauge
• Enclosure: Roto-molded LLDPE plastic
• Mounting/Rigging Provisions: (5) 3/8"-16 rigging points; Steel zinc-rich epoxy dual-layer powder-coated bracket; Aluminum aiming strap to secure angle
• Grille: 3-layer Weather-Stop™ with polyester mesh, foam, zinc-rich epoxy dual-layer powder-coated perforated steel color-matched to enclosure
• Environmental: IEC529 IP55W rating with a minimum 5° down-tilt
• Dimensions (H x W x D): 16" x 16" x 16.19" (406 x 406 x 411 mm)
• Loudspeaker Unit Weight:
• 44 lbs. (20 kg) loudspeaker only
• 47 lbs. (21.3 kg) with yoke bracket
• Shipping Weight: 51 lbs. (23.1 kg)