← Previous Product Next Product →

Symetrix Prism 12x12 Dante Programmable DSP, 12 mic/line in, 12 line out, 64x64 Dante, ARC

Name: Symetrix Prism 12x12 Dante Programmable DSP, 12 mic/line in, 12 line out, 64x64 Dante, ARC
Brand: Symetrix
SKU: Prism 12x12 Dante
Price: 3980.00 USD
Availability: InStock

Vendor: Symetrix

Symetrix Prism 12x12 Dante Programmable DSP, 12 mic/line in, 12 line out, 64x64 Dante, ARC The Prism family serves as the dependable workhorse in Symetrix’s DSP lineup, offering all the essential features required...

$3,980.00

Default Title

Subtotal:

Quantity

Description

Symetrix Prism 12x12 Dante Programmable DSP, 12 mic/line in, 12 line out, 64x64 Dante, ARC

The Prism family serves as the dependable workhorse in Symetrix’s DSP lineup, offering all the essential features required for everyday audio applications. It delivers robust processing capabilities, flexible control options, and the choice of Dante networking. Designed for projects that demand high-performance signal processing at an affordable price, Prism also ensures a standardized path for future system expansion.

Features

12 analog in and out, and powerful Symetrix DSP reduce overall system costs.
Optional 64×64 Ultra low latency Dante network audio protocol uses standard IT infrastructure.
Industry leading analog and A/D/D/A performance, 48 volt phantom mic power.
Configured using award winning Composer software. Controlled from ARC wall panels, W Series remotes, ARC-WEB and T Series touchscreens. Embedded web server enables remote metering and diagnostics.
Front panel LCD provides configuration information, system status, and analog audio levels

Specifications

Specification	Detail
Processor	1 x Analog Devices SHARC 21489 @ 400 MHz SIMD
Raw Processing Capacity	400 MIPS, 1.6 GFLOPS
Sampling Rate	48 kHz
Frequency Response (A/D/A)	20 Hz – 20 kHz, ± 0.5 dB
Dynamic Range (A/D/A)	> 113 dB, A-weighted
THD + Noise	< 95 dB (22.4 kHz BW, un-weighted); 1 kHz @ +15 dBu with 0 dB gain
Channel Separation (A/D/A)	> 110 dB @ 1 kHz, +24 dBu
Latency (A/D/A)	1.04 mS, inputs routed to outputs
Delay Memory	174 mono seconds
Analog Control Inputs	0-3.3 VDC
Recommended External Control Potentiometer	10k Ohm, linear
Logic Outputs	Low (0V) when active, pulled high (5V) when inactive
Logic Output Maximum External Power Supply Voltage	24 VDC
Logic Output Maximum External Power Supply / Current Sinking	50 mA
Logic Output Maximum Output Current	10 mA
RS-485 Serial I/O	38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port
Ethernet Cable	Standard CAT5e or CAT6, maximum device-to-device length = 100 meters
Dante Cable	Standard CAT6, maximum device-to-device length = 100 meters
ARC Cable	Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices per System	128 units per Site File
Maximum Stored Presets	1,000

Analog Inputs and Outputs

Specification	Detail
Analog A to D latency	0.28 mS
Analog Output D to A latency	0.60 mS
CMRR	> 79 dB @ 1 kHz, unity gain
Number of Analog Inputs	Twelve (12) switchable balanced mic or line level
Analog Input Connectors	3.81 mm terminal blocks
Nominal Analog Input Level	+4 dBu
Analog Input Maximum Level	+23 dBu
Analog Mic Pre-amp Gain	0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim
Analog Mic Pre-amp EIN	< -125dB with 150 ohm source impedance. 22.4 kHz BW
Analog Input Impedance	8k Ohms balanced, 4k Ohms unbalanced
Analog Phantom Power (per input)	+48 VDC, 10 mA maximum
Analog Input Dynamic Range	> 113 dB, A-weighted
Analog Input THD + Noise	< -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4 dBu.
Number of Analog Outputs	Twelve (12) balanced line level
Analog Output Connectors	3.81 mm terminal blocks
Nominal Analog Output Level	+4 dBu with 20 dB of headroom
Analog Output Level Maximum	+24 dBu (+22.8 dBu into a 2k Ohm minimum load)
Analog Output Impedance	300 Ohms balanced, 150 Ohms unbalanced
Analog Output Dynamic Range	> 117 dB, A-weighted
Analog Output THD + Noise	< -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output

Mechanical Specifications

Specification	Detail
Space Required	1U (WDH: 18.91 in. x 9.88 in. x 1.72 in. / 48.02 cm x 25.1 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical	24V 1.9A, 45W Maximum. Symetrix Part Number 12-0034. CUI part number SDI65-24-U-P5
Ventilation	Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Shipping Weight	9.4 lbs (4.2 kg)
Certifications and Compliance

Symetrix Prism 12x12 Dante Programmable DSP, 12 mic/line in, 12 line out, 64x64 Dante, ARC

Vendor: Symetrix

Related Product

Biamp Systems MASK6C-BL/MASK6CT-W 6.5" design two-way loudspeaker black/white with Clickmount system | Black, White

Biamp Systems PST-14 pendant Split Loom Tubing, 14-foot | 910-00610

Tannoy CMS503DC-BM 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation(PAIR)

Biamp Systems SUBLIME-BL, SUBLIME-W Ultra compact, 6.5-inch, passive, indoor, subwoofer, full-range level output to satellites | Black, White

Biamp Systems SUB2400-BL, SUB2400-W Passive, 2 x 10-inch subwoofer | Black, White

Biamp Systems SUB2201-BL, SUB2201-W Passive, 10-inch subwoofer | Black, White

Biamp Systems Desono SPA-UBDX200-W/ SPA-UBDX200-B U-bracket kit, aluminum with ClickPlug | Black, White

Biamp Systems Desono SPA-UBDX100-B U-bracket kit, aluminum with ClickPlug, for Desono DX-S5 surface mount loudspeaker | Black, White

Biamp Systems Desono SPA-TR Series Ceiling Loudspeaker Trim Rings

Biamp Systems SPA-RAIL48 48-inch tile rail kit, 2 pair (for all Desono ceiling loudspeakers) | 910-00039

Biamp Systems Desono SPA-NC Series New Construction Brackets

Biamp Systems SPA-GSQ100 Square grille with integrated safety wire, 12-pack | 910-00095

Biamp Systems Desono Black Replacement Grilles – SPA-GRB Series

Biamp Systems SPA-GHH Series High Humidity Grille

Biamp Systems Desono PSC Pendant Speed Clamp | 910-00609

Biamp Systems PHK-30 Pendant Hang Kit 30 Ft | 910-00607

Newsletter

Special Services

My account

Customer service

contact info

Symetrix Prism 12x12 Dante Programmable DSP, 12 mic/line in, 12 line out, 64x64 Dante, ARC

Vendor: Symetrix

Related Product

Call for Price