Earthworks Mp5 Matched pair of M50s in Wood box (mic clips & ADP1 adapter included)

Vendor: Earthworks
Earthworks  Mp5 Matched pair of M50s in Wood box (mic clips & ADP1 adapter included) The M50 is a professional measurement microphone designed by Earthworks intended for large room calibration. The ultra wide frequency...
$2,799.00 $3,499.00
Title

Earthworks  Mp5 Matched pair of M50s in Wood box (mic clips & ADP1 adapter included)

The M50 is a professional measurement microphone designed by Earthworks intended for large room calibration. The ultra wide frequency response of 3Hz-50 kHz is flat throughout the whole spectrum and leads in exact room calibration using MLSSA, Smaart, SIMM and TEF based systems. The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule. The M50 also ships with a "white" noise generator that is capable for adapting to a 1/2" calibrator adapter for field calibration.

Matched Pair

This stereo set of Earthworks M50 microphones are perfectly matched in sensitivity and frequency response from the manufacturer.

Miniature Omni-directional Capsule

The miniature element provides an accurate omni-directional pattern with an even coherent response at the direct and off-axis sections of the microphone capsule.

Wide Linear Frequency Response

The wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail.

Uncolored Response

The uncolored, flat signal results in accurate room calibration for indoor and outdoor application.

Earthworks M50 Specs

  • Transducer: Condenser
  • Polar Pattern: Omni-directional
  • Frequency Response: +/- 1dB 3Hz to 50kHz +1 / -3dB
  • Dynamic Range (Typical): 72 dB
  • Signal-to-Noise Ratio: 22 dB SPL Equivalent (A weighted)
  • Maximum Input Sound Level: 142 dB SPL
  • Power Requirements: +48 V Phantom, 10 mA
  • Output Impedance: 600 ohms between pin 2 and pin 3
  • Output Connectors: XLR intended to drive a balanced transformerless input Pin2+
  • Pad: No
  • Low Frequency Roll-Off: No
  • Dimensions: 9 x .860" (229 x 22mm)(Length x Diameter)
  • Weight: 225 g (.5 lb)

Packaging Info

  • Package Weight: 3.3 lb
  • Box Dimensions (LxWxH): 12.5 x 6.5 x 3"