Electro Voice R300-E-C Headworn System in case
Vendor: Electro Voice
Available
Electro Voice R300-E-C Headworn System in case
The Electro Voice R300-E-C is a robust UHF wireless bodypack system that is suitable to use for any application where it is truly in need for a wireless headworn microphone. The system's BP-300 rugged metal bodypack transmitter is designed to use in a simple way, and with the use of only two AA batteries the system can be powered up. The HM3 headworn microphone is made as a double-ear, light-weight hook that is truly comfortable for extended daily use, and is capable of providing the convenience for the user with presentations or performances that are hands-free. The receiver's dual antenna diversity is designed for helping to avoid the signal dropouts, and its durable metal frame and chassis can either be used on a tabletop, or rack-mounted with optional rack mounting hardware.
- ClearScan automatically finds the clearest channel
- EZsync one-step channel setup
- HM3 omni-directional microphone
- 14 hour battery life from two AA alkaline
- Rugged metal transmitter
- Metal receiver chassis with optional rack mount
Antennas | Flexible TNC 1/2 Wave |
Audio Frequency Response | 80 Hz - 18kHz +/-2dB |
Balanced Line Level Output (RMS Adjustable) | 10 - 100 mV |
Battery Life | 14 hours with (2) AA alkaline typical |
Case Material | metal |
Connector Type | 1/4 inch unbalanced, 3-pin XLR balanced |
Controls | on/off, Set, Up, Down, Sync |
Distortion (@ 1 kHz, 40 kHz deviation) | Less than 1.0, 0.4 typical% |
Diversity | True Antenna |
Dynamic Range | greater than 95dB |
Element | HM-3 Omni-directional headworn |
Family | R300 |
Number of Channels | 32 per band, 8 Simultaneous |
Operating Temperature Range | 5º - 45º C (41º - 113º F) |
Polar Pattern | Omnidirectional |
Power Requirement | 12-16 VDC, 500 mA max |
Power Supply | 12 VDC, 500mA max |
Receiver Type | Synthesized PLL |
RF Frequency Range | 16MHz |
RF Output | 8 mW typical |
RF Sensitivity (12 dB SINAD) | less than 1.0uV |
Signal-to-Noise Ratio (A-weighted) | greater than 100dB |
Squelch | Tone code plus Amplitude |