Audio MG18HC A Miniature gooseneck condenser microphone, 18 inch in lengths.

Vendor: Audix
Descriptions Audio MG18HC, MIC, POD, 18" GNECK, H-CARD, BLK, RF, A Miniature gooseneck condenser microphone, 18 inch in lengths. Featuring proprietary circuitry with RF Immunity. (Hypercardioid) The Audix MG18HC features a gooseneck microphone and...
$349.00 $429.00
Title

Audio MG18HC, MIC, POD, 18" GNECK, H-CARD, BLK, RF, A Miniature gooseneck condenser microphone, 18 inch in lengths. Featuring proprietary circuitry with RF Immunity. (Hypercardioid)

The Audix MG18HC features a gooseneck microphone and best choice for houses of worship, auditoriums, board rooms, conferences and many more. Also, the Audix MG18HC mic is a dual-preamp circuitry minimizes audio noise and RF (Radio Frequency) interference. The Audix MG18HC also, features a contoured frequency response well suited for speech pick up. In addition, the Audix MG18HC mic has a flexible gooseneck that ensures flexible, stable positioning of the capsule.

The MG Series gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other built into the base of the XLR. This circuitry is internally balanced, insuring the audio path will be isolated from hum and noise. In addition, this circuitry provides protection from RF interference and spurious emissions from cell phones and wireless GSM devices.

Audix MG18HC Product Features

  • Natural accurate sound
  • Modular threaded capsule(s)
  • Low noise electronics, dual circuitry, internally balanced
  • RF Immunity
  • Low profile design
  • Tension fit design for stable positioning
  • Measures 22.4" (570mm)
  • Hypercardioid Polar Pattern
  • XLR Base
  • RFI Noise Rejection

Transducer Type: Pre-Polarized Condenser

Frequency Response: 60 Hz - 19 kHz

Polar Pattern: Cardioid / Hypercardioid
(MG12HC, MG15HC & MG18HC)

Output Impedance: 150 Ohms balanced

Sensitivity: 38 mV (C) / Pa @ 1k
32 mV (HC) / Pa @ 1k

Equivalent Noise Level : 22 dB (A weighted)

Signal to Noise Ratio: 72 dB

Power Requirements: 18 - 52 Volts phantom

Maximum SPL: ≥130 dB

Dynamic Range: 108 dB

Polarity: Positive pressure on diaphragm/produces positive voltage on pin
2 relative to pin 3 of output XLR
connector

Materials / Finish: Machined Brass / Black Finish

Weight: 134 g / 4.73 ounces (MG18)

Length: 570 mm / 22.4 inches (MG18)