← Previous Product Next Product →

JBL CONTROL 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

JBL CONTROL 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

Name: JBL CONTROL 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System
Brand: JBL
SKU: CONTROL 50S/T
Price: 391.00 USD
Availability: InStock

Vendor: JBL

JBL CONTROL 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass...

$391.00 $486.51

Subtotal:

Quantity

Description

JBL CONTROL 50S/T Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System

The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

Features

Full bandwidth 32 Hz – 20 kHz high fidelity sound
Selectable 70V/100V for distributed lines, or low impedance
Versatility for either two or four satellite speakers per system
Available in black or white

Specifications

Frequency Range (-10dB)	32 Hz – 200 Hz
Frequency Response (±3 dB)	50 Hz – 150 Hz
Power Capacity	300 Watts Continuous Program Power (2 hrs)150 Watts Continuous Pink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs)100 Watts Continuous Pink Noise (100 hrs)
Sensitivity	95 dB (near corner), 89 dB (center of wall)
Maximum SPL (1m)	115 dB average, 121 dB peak (near corner)109 dB average, 115 dB peak (center of wall)
Impedance	8 ohms (in bypass/thru mode)
Transformer Taps	80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Drivers	200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input Connectors	Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
Enclosure	Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D)	Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)Wall Bracket: 15 mm (0.6 in) deep
Mounting Hardware	2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight (each)	9.0 kg (20 lbs)
Shipping Weight	10.2 kg (23 lbs)
Included Accessories	Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.
Grille	Zinc-plated steel
Coverage Angle	Omnidirectional