Audix L5, MIC, MICRO, CARD,BLK, LAVALIER, W/3' CBL, Micro-sized lavalier condenser microphone for wireless and wired applications.

Audix L5, MIC, MICRO, CARD,BLK, LAVALIER, W/3' CBL, Micro-sized lavalier condenser microphone for wireless and wired applications.

The Audix L5 is a micro-sized (5 mm) cardioid condenser microphone and also available with an omnidirectional polar pattern. The Audix L5 also features a modular interchangeable capsules, is intended for use with the Audix wireless systems as well as hard-wired vocal and instrument applications.

The designed of the Audix L5 can provide the highest quality sound in the smallest possible package, the Audix L5 miniature condenser is ideal for broadcast and live sound applications including speech, interview, presentation, theatrical production and instruments (guitar, violin). Also, the Audix L5 has clarity, a low profile, ease of operation and the ability to accurately capture and can reproduce vocals from 4" - 8" or acoustic instruments from 1" - 2"

Audix L5 has a smooth and accurate frequency range of 20 Hz - 20 kHz for L5O and 40 Hz – 20 kHz for the L5, these microphone are lightweight and discreet.

Audix L5 manufactured to high standards and tight tolerances, the Audix L5 miniaturized condenser microphone features a modular threaded capsule, a machined brass body with matte black finish and high quality shielded microphone cable.

Audix L5 Product Features

• 5mm modular capsules
• Broadcast quality
• Small, lightweight, low profile
• Natural, accurate sound reproduction
• Easy to use and set up

Transducer Type: Pre-Polarized Condenser

Frequency Response: 40 Hz - 20 kHz

Polar Pattern: Cardioid / Omni 

Output Impedance: 200 ohms

Sensitivity: 6 mV (C) / Pa @ 1k 8 mV (O) / Pa @ 1k

Equivalent Noise Level: < 31 / 30 dB (A-Weighted)

Signal to Noise Ratio: > 63 / 64 dB

Dynamic Range: 99 dB / 130 dB

Power Requirements: 9-48 V Phantom Power

Maximum SPL: > 130 / > 134 dB

Cable / Connector: Shielded 3’ (L5) terminating to a miniature 3 pin XLRf connector

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3

Materials / Finish: Machined Brass / Black Finish

Weight: 13 g / 0.47 oz

Length: 23 mm / 0.91 in