DPA 4062-OC-C-B00/F00 Lavalier Microphone 4062 CORE Omni Mic, Extreme SPL, Black/Beige, MicroDot

Vendor: DPA
DPA 4062-OC-C-B00/F00 Lavalier Microphone 4062 CORE Omni Mic, Extreme SPL, Black/Beige, MicroDot Color Variants: 4062-OC-C-B00 - Black 4062-OC-C-F00 - Beige The DPA 4062 CORE comes in color variants: 4062-OC-C-B00 - Black and 4062-OC-C-F00 - Beige. It is a professionally...
$480.00
Color
Black
Beige

DPA 4062-OC-C-B00/F00 Lavalier Microphone 4062 CORE Omni Mic, Extreme SPL, Black/Beige, MicroDot

Color Variants:

  • 4062-OC-C-B00 - Black
  • 4062-OC-C-F00 - Beige

The DPA 4062 CORE comes in color variants: 4062-OC-C-B00 - Black and 4062-OC-C-F00 - Beige. It is a professionally designed moisture-resistant, miniature lavalier microphone that carefully created for use along with wireless systems for performance, broadcast and theatrical applications. The electret-condenser capsule is intended for offering an extremely low sensitivity setting that is made for allowing it to handle very loud performers, instruments, and vocalist. The mic is capable to deliver clear, crisp and intelligible audio, and also the rugged yet unobtrusive design is very well suited to the demands of professional live stage work and presentations at the same time.

This version of the 4062 is using the DPA's CORE technology for delivering a 16 dB increase in dynamic range and a 16 dB reduction in noise over the 4062 Legacy model. The mic comes including two interchangeable capsule-protection grids that are made for altering the sonic character of the microphone. The High-Boost Grid is made for creating a peak at 12 kHz, made helpful for chest placement, and also the Soft-Boost Grid is offering a subtle boost between 8 to 20 kHz, which is lightly enhancing the signal presence for ensuring the clarity.

Equipped with an SPL rating of 154 dB, the microphone is made more than capable of handling very loud vocalists, speakers, and presenters. The 4062 is capable to even be used to effectively mic talent during high-volume sporting events such as auto racing where loud engine noise would cause distortion in many other lavs. The mic is also capable to be used very effectively for capturing loud instruments that includes drums, brass, and percussion—that makes it a flexible tool for use in houses of worship and live event productions. The 4062 CORE is powered by 5 to 10V plug-in power from a wireless transmitter and also comes featuring a modular design with the use of a Microdot output connector. Separately available adapters allow you to use the mic with a wide variety of transmitters.

Key Features

  • For Theater, Sports, TV & Presentation
  • Omnidirectional for Consistent Levels
  • For Various Transmitters via Adapter
  • For Very Loud Sources up to 154 dB SPL
  • IP58-Certified Dust & Moisture Resistant
  • CORE Increases Dynamics & Reduces Noise
  • Requires 5 to 10V or Phantom Power
  • Includes Soft- and High-Boost Grids
Microphone
Primary Applications Live Sound, Studio Recording, Broadcast, Audio for Video, Location Sound
Form Factor Lavalier
Intended Sound Sources Vocals, Electric Guitar, Electric Bass, Acoustic Bass, Piano, Drums, Percussion, Beatbox, Snare, Toms, Cymbals, Overhead, Instrument, Horns, Brass, Trumpet, Trombone, Saxophone, Baritone Saxophone, Soprano Saxophone, Flute, Strings, Violin, Viola, Cello
Sound Field Mono
Operating Principle Pressure Operated
Capsule Condenser
Diaphragm 0.2" / 5.4 mm
Polar Pattern Omnidirectional
High-Pass Filter Yes
Gain Adjustment None
Performance
Frequency Range 20 Hz to 20 kHz 
Maximum SPL 139 dB SPL RMS (Plug-In Power, 1% THD)
154 dB SPL RMS (Plug-In Power, 10% THD)
Impedance 40 Ohms
Sensitivity 1 mV/Pa at 1 Hz
Dynamic Range 106 dB A-Weighted
Equivalent Noise Level 33 dB A-Weighted (20 μPa)
THD < 1%
Connectivity
Output Connectors (Analog) 1 x Microdot Coaxial Male (Locking, on Attached Cable)
Headphone Connector None
Cable Length 5.9' / 1.8 m
Power
Bus Power None
Operating Voltage 5 to 10 V
Operating Current Consumption 1.5 mA
Physical
Color Beige
Mounting Alligator Clip, Instrument Clamp, Instrument Surface Mount, Lapel Pin / Dracula Mount, Surface-Mount (with Optional Hardware)
Included Case None
Included Filters None
Operating Temperature -40 to 113°F / -40 to 45°C
Operating Humidity 0 to 90%
Dimensions ø: 0.2 x L: 0.5" / ø: 5.4 x L: 12.7 mm
Weight 0.26 oz / 7.5 g