Sony Professional ECM-66BC, Miniature cardioid directional lapel Electret condenser microphone
Vendor: Sony
Available
Sony Professional ECM-66BC, Miniature cardioid directional lapel Electret condenser microphone
The unique design of the Sony Professional ECM-66BC yields clean, natural reproduction of musical instruments while maintaining excellent isolation from the acoustic environment. Unlike most miniature microphones, this mic has a unidirectional polar pattern, carefully contoured for better control of feedback. The higher voltage supplied to the microphone by the built-in DC to DC converter increases the maximum input sound pressure level to an amazing 130 dB SPL. This amazing construction also complements the electret condenser design, resulting in excellent transient response and thus better tonal quality. For added versatility. The battery on/off switch on the power supply helps save the battery. An LED illuminates to show battery condition when power is turned on. A uni-directional miniature microphone developed specifically for recording musical instruments and voice when superb rejection of the ambient sound is desirable, the Sony Professional ECM-66BC will make a welcome addition to your microphone arsenal.
Sony Professional ECM-66BC Main Features
- Designed for a wide range of audio sources: The ECM-66B's capsule features an extended frequency response and can handle high SPL signals
- Ready for wired applications: The ECM-66B is the wired microphone version with an XLR output and integral power supply barrel. It can either be powered by an external microphone amp or an internal battery (LR6/AA size).
- Compact size: The capsule has a diameter of only 10.6mm and is 24mm long, making it easy to conceal.
Transducer | Electret Condenser |
Polar Pattern | Unidirectional |
Frequency Response | 70 Hz - 14 kHz |
Dynamic Range (Typical) | Greater than 101 dB |
Signal-to-Noise Ratio | 65 dB @ 1 kHz |
Maximum Input Sound Level | 130 dB |
Power Requirements | This Microphones Power is Derived from the Beltpack Transmitters |
Output Impedance | 100 Ohms (1 kHz) |
Output Connectors | 1.2m Cable with an SMC9-4P Connector for Use with the WRT- 822A and WRT-860A Beltpack Transmitters |
Case | Protective Carrying Case |
Pad | None |
Low-Frequency Roll-Off | None |
Applications | Designed for Instrumental Applications |
Dimensions | .96 x .44" (24.2 x 10.6mm) LxW |
Weight | .25 oz. (7 g) |