← Previous Product Next Product →

Martin Audio CDD-LIVE12, Self-powered, 2-way Speaker with a 12 inch Black & White

Name: Martin Audio CDD-LIVE12, Self-powered, 2-way Speaker with a 12 inch Black & White
Brand: Martin Audio
SKU: CDD-LIVE12B
Price: 2525.00 USD
Availability: InStock

Vendor: Martin Audio

Martin Audio CDD-LIVE12, Self-powered, 2-way Speaker with a 12 inch Black & White Martin Audio CDD-LIVE12 Featuring a high-specification 12” (300mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver, it can also deliver more...

$2,525.00

Subtotal:

Quantity

Description

Martin Audio CDD-LIVE12, Self-powered, 2-way Speaker with a 12 inch Black & White

Martin Audio CDD-LIVE12 Featuring a high-specification 12” (300mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver, it can also deliver more consistent audience coverage than a conventional system with a fixed X° x Y° coverage pattern and has wide 110° horizontal coverage close-up. The innovative CDD technology can also achieve a ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. A self-powered system, the Martin Audio CDD-LIVE 12 incorporates a two-channel Class D amplifier, DSP, and Dante™ digital audio networking — simplifying set-up, enhancing control, and eliminating amplifier racks. The onboard amplifier delivers 2000W LF + 500W HF peak output to the drivers, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain, and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software.

Martin Audio CDD-LIVE12 is for simple set-ups, ‘plug-and-play’ presets — as well as a user-defined preset — can be selected on the rear panel, instead of using computer control. As an alternative to its analog inputs, the Martin Audio CDD- LIVE 12 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run. The Martin Audio CDD-LIVE 12 is incredibly versatile. Its multi-angle enclosure can be used in either horizontal or vertical orientation, with the rotation of the driver easily accomplished by removing the screw-free, protective grille. The tour-grade enclosure is constructed from multi-laminate plywood and finished in a hard-wearing polyurea coating. Integral fittings include a top-hat for pole mounting and multiple M8 inserts for attachment to a wall-bracket, yoke, or universal bracket with a wide range of up and down tilt angles.

Martin Audio CDD-LIVE12 Main Key Features

Compact, self-powered two-way system
Coaxial Differential Dispersion™ technology
Onboard Class D amplification and DSP
Dante™ Digital Audio networking
Global mains operation with Power Factor Correction
User-rotatable CDD™ driver
Vertical and horizontal mounting options
Tour-grade, multi-angle plywood enclosure
IP24 rating option with rain cowl
Comprehensive mounting accessories

Specification

ACOUSTICS
TYPE	Compact, Coaxial Differential Dispersion powered two-way system
FREQUENCY RESPONSE (1)	62Hz – 20kHz ±3dB, -10dB @ 50Hz
DRIVER	LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
INPUT SENSITIVITY	-30dBu for 100dB SPL
MAXIMUM SPL (2)	122dB continuous / 128dB peak
DISPERSION	110˚-60˚ horizontal, 60˚ vertical (user-rotatable)
CROSSOVER	1.5kHz Active LR8 with low latency HF FIR equalization Balance presets for pole mount/ pole mount with sub/ stage monitor
MODULE AUDIO INPUT
CONNECTORS	Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE	20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL	24.6 Vpp (+21dBu), over-voltage protected
INTERNAL PROCESSING	Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct HPF Low latency HF FIR filters Up to 200ms input delay Pre-set selection via a rear panel switch
NETWORK
CONNECTORS	2xNeutrik® Ethercon
PROTOCOL	TCP/IP and UDP/IP
AMPLIFIER
TYPE	2 channel switch-mode, class D, Bridged Tied Load + 1 channel switch-mode, class D
PEAK OUTPUT POWER	2500W total 2000W LF, 500W HF
AVERAGE EFFICIENCY	89%
COOLING	External convection cooled, with an internal fan
MAXIMUM AMBIENT TEMPERATURE	40°C (104°F) for full output
POWER SUPPLY
TYPE	Switch mode, the fixed frequency with PFC
AC INPUT OPERATING RANGE	85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR	> 0.98
NOMINAL POWER CONSUMPTION	160W
MAINS CONNECTOR	Neutrik® Powercon True1
MECHANICAL
ENCLOSURE	Extensively braced multi-laminate plywood.
FINISH	Textured black PU coating.
PROTECTIVE GRILLE	HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth.
FITTINGS	Top hat for pole mounting 15 x M8 mounting points Two side pocket handles Optional weather protection cowl
IP RATING	IP24 factory option available
DIMENSIONS	(W) 359mm x (H) 580mm x (D) 373mm (W) 14.13in x (H) 22.83in x (D) 14.69in
WEIGHT	28kg (61.6lbs) excluding Transit cover
ACCESSORIES	Transit Cover Optional wall, yoke, and universal brackets