Martin Audio MLX, Very high-performance 2x18" Subwoofer

Vendor: Martin Audio
Martin Audio MLX, Very high-performance 2x18" Subwoofer Class-leading output levels are achieved by combining Hybrid® horn/reflex loading with IPAL driver and amplifier technology. Hybrid loading of two ultra-long excursions 18” (460mm) neodymium magnet...
$22,000.00
Title

Martin Audio MLX, Very high-performance 2x18" Subwoofer

Class-leading output levels are achieved by combining Hybrid® horn/reflex loading with IPAL driver and amplifier technology. Hybrid loading of two ultra-long excursions 18” (460mm) neodymium magnet drivers perfectly balances low-frequency extension with breathtaking chest-thumping bass that has a physical impact. Martin Audio MLX enclosures are designed to be flown or ground-stacked and a combination of forwarding and rear-facing enclosures can be configured as a directional subwoofer array with specific directional properties, including cardioid. Audio settings for the Martin Audio MLX can be controlled either cabinet-by-cabinet or as complete arrays via the VU-NET™ network, with its intuitive graphical interface. Symmetrical rigging enables MLX’s to face backward in flown arrays.

The Martin Audio MLX’s onboard Class D amplifier delivers a total peak output of 8500W. Its lightweight power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz and Power Factor Correction ensures stable performance independent of mains fluctuations, as well as reducing demands on the mains supply. The amplifier, power supply, and control electronics are housed in a field-replaceable, fan-cooled module that is designed to withstand the varied environmental conditions — such as rain and high ambient temperatures — typically found in live sound applications. The MLX enclosure is made from multi-laminate birch plywood and finished in a hard-wearing, textured black polyurea coating. A rigid perforated steel grille protects the front of the enclosure, while rubber cheeks protect the sides. Interlocking skids protect the top and bottom surfaces and prevent movement when stacked. Up to 15 MLX’s can be flown from an MLA system flybar.

Martin Audio MLX Main Key Features

  • Ultra-high output subwoofer with onboard Class D amplification. DSP and networking
  • Hybrid horn/reflex loading for maximum acoustic efficiency and low-frequency extension
  • Dual ultra-long excursion 18” (460mm)/4.5” (115mm) voice coil neodymium drivers
  • Switched-mode power supply with PFC (Power Factor Correction) and global mains voltage operation
  • Forward or rear-facing operation
  • Designed to meet IP24 environmental rating
ACOUSTICAL
TYPE Hybrid® horn/reflex subwoofer
FREQUENCY RESPONSE (1) 35Hz-150Hz ± 3dB
MAXIMUM SPL (3) LF: 140dB continuous, 150dB peak
DRIVERS
LF 2x18” 115mm / 4.5” voice coil, ultra-long excursion, high-efficiency neodymium magnet
RATED POWER (2)
LF 3000W AES, 12000W peak
DISPERSION
Digitally controlled in an array
AUDIO INPUT
CONNECTORS Female XLR input
Male XLR link output
ANALOGUE INPUT IMPEDANCE 20kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL 6.15Vrms (+18dBu), over-voltage protected
AES/EBU IMPEDANCE 110Ω balanced, Receive and transmit termination
NETWORK
CONNECTORS IP68rated 8-way, quick-release type
PROTOCOL U-NET
AMPLIFIER MODULE
TYPE Single-channel Class D, fixed frequency
PEAK OUTPUT POWER 8500W
AVERAGE EFFICIENCY 85%
COOLING 2 x temperature-controlled internal fans
1 x low-speed internal blower
1 x temperature-controlled external fan
MAXIMUM AMBIENT TEMPERATURE 45°C (113°F) for full output
POWER SUPPLY
TYPE Switch mode, the fixed frequency with PFC
AC INPUT OPERATING RANGE 100 – 240V ~ AC, 50 - 60Hz
POWER FACTOR > 0.95
NOMINAL POWER CONSUMPTION 600W
MAINS CONNECTOR 16A IEC309 (Ceeform)
GENERAL
ENCLOSURE Extensively braced, multi-laminate birch-ply
FINISH Textured black PU coating
PROTECTIVE GRILLE Black HEX perforated steel
FITTINGS
  • Proprietary rigging system
  • Protective rubber side-cheeks incorporating skids
  • Wheel-board
  • Transit cover
  • Weather protection cowl
IP RATING IP 24
DIMENSIONS (inc. wheel-board) (W) 1126mm x (H) 607mm (607mm) x (D) 1027mm (1200mm)
(W) 44.4in x (H) 23.9in (23.9in) x (D) 47.2in
WEIGHT (EX. WHEEL-BOARD) 160kg (352lbs)