Martin Audio SXC118W, Single 18 inch Subwoofer, WHITE

Vendor: Martin Audio
Martin Audio SXC118W, Single 18 inch Subwoofer, WHITE The Martin Audio SXC118W is specially designed for touring sound and installations, the Martin Audio SXC118W features a compact, high-performance cardioid subwoofer. It features an...
$3,640.00
Title

Martin Audio SXC118W, Single 18 inch Subwoofer, WHITE

The Martin Audio SXC118W is specially designed for touring sound and installations, the Martin Audio SXC118W features a compact, high-performance cardioid subwoofer. It features an 18” (460mm) forward-facing driver and a 14” (356mm) rear-facing driver, each driven independently by separate amplifier channels and DSP. Each driver has its own chamber with an optimized bass reflex port. This arrangement produces a cardioid dispersion pattern which maximizes the front radiation and reduces unwanted radiation behind the subwoofer. The recommended iK42 amplifier optimizes the DSP parameters for front and rear drivers to maximize the rear rejection — from 21dB at 43Hz to 28dB at 75Hz. This keeps low frequencies away from stages, turntables, and walls as well as reducing reverberant energy in the room, greatly improving the system’s low-frequency response accuracy and impact. In front of the enclosure, the output from the two drivers is additive, giving an extra 2dB of output when compared with a conventional 1 x 18” subwoofer.

The enclosure of the Martin Audio SXC118W  is made from plywood and finished with a hard-wearing textured paint. It is equipped with four grab handles and foam-backed perforated steel grilles to protect the front and rear drivers. It can be used individually, stacked, or flown individually by means of threaded flying inserts. The Martin Audio SXC118W is the best partner for WPM and WPS line arrays or our range of point source loudspeakers where low-frequency pattern control is required. Interlocking skids prevent movement when stacked and a threaded plate in the top surface facilitates pole-mounting of up to 4 WPM enclosures or a singular point source enclosure. The product is supplied as standard without castors but they can be purchased as an accessory. By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Martin Audio SXC118W Main Features

  • Compact, cardioid subwoofer
  • Front-facing 18” (460mm)/4” (100mm) voice coil driver
  • Rear-facing 14” (356mm)/3.5” (88mm) voice coil driver
  • Cardioid dispersion pattern
  • 28dB rear rejection at 75Hz
  • High output capability
  • Tour-grade plywood enclosure with flying inserts
TYPE  Compact, cardioid subwoofer
FREQUENCY RESPONSE (1)  43Hz – 150Hz ±3dB, -10dB @ 34Hz
DRIVERS
  • 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
  • 14” (356mm)/3.5” (88mm) voice coil, long excursion, neodymium magnet, waterproof cone
RATED POWER (2)
  • 18”: 1000W AES, 4000W peak
  • 14”: 800W AES, 3200W peak
SENSITIVITY (10)  104dB
MAXIMUM SPL (9)  140dB peak
NOMINAL IMPEDANCE
  • 18”: 8Ω
  • 14”: 8Ω
DISPERSION (-6DB)  Cardioid
ENCLOSURE  Multi-laminate birch and poplar ply
FINISH Textured white paint
PROTECTIVE GRILLE  White HEX perforated steel
CONNECTORS  2 x NL4
PIN CONNECTIONS (INPUT)  18”: +1, -1; 14”: +2, -2
PINS CONNECTIONS (LINK)  18”: +1, -1; 14”: +2, -2
FITTINGS
  • Two skids on base, with mating channels on top
  • M20 top-mounted thread plate for pole mounting
  • Two bar handles on each side
  • Four fittings for optional transit cover
  • 16 x M10 Mounting Points
  • 16 x M8 inserts for optional castors
  • Two bar handles on each side
DIMENSIONS (INCL SKIDS)
  • (W) 650mm x (H) 603mm x (D) 812mm (940mm incl castors)
  • (W) 25.6in x (H) 23.7in x (D) 32in (37in incl castors)
WEIGHT
  • 69kg (152lbs)
  • 73kg (161lbs) incl castors