OZEN OZEN-OZ-25PED50S AGILE 25S 150/FB (S-LOC) w/2 extending pan bars + PED50 (includes DOLLY HD)

OZEN OZEN-OZ-25PED50S AGILE 25S 150/FB (S-LOC) w/2 extending pan bars + PED50 (includes DOLLY HD)

The OZEN OZEN-OZ-25PED50S Pedestal System is professionally designed capable of combining the Agile 25 S-LOC 150mm fluid head that comes with the PED50 pedestal and tripod dolly system, this offers a complete, mobile support system for use in both studio and location setups. It is professionally designed for heavier camera rigs, the Agile 25 head is featuring the support for up to 80 lb rigs and a Build-Lock system for having an added security during the time of setting up your camera. The pneumatic PED50 pedestal comes featuring a 31.5 to 61.4" height range, a 15.4" stroke, and cable guards.

OZEN Agile 25 S-LOC Fluid Head (150mm)
The OZEN Agile 25 S-LOC Fluid Head is a professionally designed heavy-duty fluid head featuring a wide camera interface for having steady support of camera rigs that weighs up to 80 lb. The 150mm ball base is capable to be converted to a flat base for having lower-profile, slider, or car rig applications. A Build-Lock system capable of providing your gear security and you with peace of mind by the time of assembling your camera and accessories on the head. The S-LOC plate is allowing the 6.5" of travel for balancing the camera forward and back.

This head's familiar placement of pan, tilt, and counterbalance controls are offering comfort and ease and operating at the same time, and the 150mm ball base is enabling the fast leveling. This fluid head features nine steps of pan and tilt drag plus a "0" setting for whip pans, 16 steps of counterbalance adjustment, and a built-in illuminated bubble level. Independent pan and tilt locks allow you to lock off one axis and still move the head on the other axis. Replaceable pan handle rosettes on the left and right side of the head enable you to use both included telescoping handles simultaneously.

150mm Leveling Ball/Flat Base
The 150mm leveling ball makes it quick to level the head on your tripod legs or other platforms and keep the center of balance within the 6" diameter of the base for smoother operation without straining the head. The convertible flat base provides a lower-profile base for a car rig, scaffolding, or other compatible support.
Counterbalance
A 16-step counterbalance enables you to adjust the head for a variety of camera rigs weighing from 8.8 to 80 lb. A counterbalance system neutralizes the weight of the head, so it will hold the desired tilt position.
Pan and Tilt Drag
Nine steps and a zero setting enable you to adjust the head for smooth moves, fast or slow. The dampening settings allow you to adjust your setting from shot to shot, while the stepped settings make your drag selections repeatable.
Build-Lock Safety System
The Build-Lock system allows you to engage a safety pin with the tilt at zero, preventing the tilt axis from moving, while you assemble the camera on the head without having to worry about stressing the pan lock or having the head tilt suddenly under an unbalanced load. Once the camera and accessories are assembled (built) and roughly centered on the head, release the pin and fine-tune the balance on the head.
QR Plate and Balance Adjustment
The 150mm leveling ball makes it quick to level the head on your tripod legs or other platforms and keep the center of balance within the 6" diameter of the base for smoother operation without straining the head. The convertible flat base provides a lower-profile base for a car rig, scaffolding, or another compatible support. The use of an optional baseplate or VCT system for increased balancing ability is customary with larger cameras.
Dual Pan Handle Rosettes
Removable rosettes on each side of the fluid head allow you to attach the included pan handles for two-handed control. If damaged or stripped, the rosettes can be removed and replaced with new ones.

OZEN PED 50 Pneumatic Video Pedestal Kit with Dolly
The PED 50 Pneumatic Video Pedestal from OZEN supports loads up to 110 lb and is compatible with separately available 100mm ball, 150mm ball, and flat base heads. Easy to assemble and break down, the PED 50 is suitable for both studio and remote productions.

This pedestal ranges from 31.5 to 61.4" in total height and features a maximum center column rise (on-shot stroke) of 15.4". For safety, the center column features both a pressure-relief valve and air pump refilling. A heavy-duty dolly with arc-tracking wheels and cable guards forms the base of the PED 50 system.

Versatile Head Base
Compatible with 100mm ball, 150mm ball, and flat base heads
Payload Capacity
Supports medium to heavy weight rigs up to 110 lb
On-Shot Stroke
Can be lifted a maximum of 15.4" in one motion for smooth vertical adjustments
Height Range
31.5 to 61.4" total height range
Pneumatic Column
Pressure-relief valve and air pump refilling for safety
Portable
Assembles and breaks down easily for location shoots
Heavy-Duty Dolly
Locking, arc-tracking wheels with cable guards