Furman BB-RS232, BlueBOLT Ethernet To BlueBOLT Gateway For CN-1800S/CN-2400S/CN-3600S E

Furman BB-RS232 adaptor can also provides Ethernet connectivity to BlueBOLT-supported Furman Sequencing products CN-1800S, CN-2400S,CN-3600SE that are otherwise only capable of RS-232 communication. Once the Furman BB-RS232 adaptor is connected between the BlueBOLT supported product (via RS-232) and the site's Local Area Network (via Ethernet), the product can communicate with our BlueBOLT servers.

The Furman BB-R232 allows you to:

• Control individual outlets or outlet banks.
• Monitor your devices and power status.
• Receive email alerts for power events.
• Schedule tasks such as power on, off, cycling, and sequencing.
• Manage multiple devices in your chain of devices.
• Utilize device-specific features for your compatible product.

Product Highlights of the Furman BB-RS232

COMMUNICATION PORTS

RS-232 with DSUB 9 Male connector. Pins 2 (RXD), 3 (TXD) and 5 (COM) are used for communication, pins 1 (GND) and 9 (+12V) are used for power.

100BaseT Ethernet Communication with BlueBOLT service or a control system on the Local Area Network.

INDICATORS

For BlueBOLT connected, Status, Ethernet Link Status, and Data Activity.

RESET BUTTON

Short press of Reset causes adaptor to reset the device. Holding down Reset for >10 seconds causes adaptor to revert to its default setting.

POWER

Powered through non-communication signal wires of supplied 9-conductor cable (for RS232 port) or with included wide-range AC/DC switched-mode wall adaptor.

MOUNTING

Capable of being mounted to the rear equipment rack rail via its flange holes and supplied rack screws or on side of the equipment rack via the flange holes and zip-ties (not supplied).