Furman ELITE-15 PF I, Conditioner Power HT 15A Power Factor

Vendor: Furman
Descriptions Furman ELITE-15 PF I, Conditioner Power HT 15A Power Factor Furman ELITE-15 PFI has pioneered the development of AC power products for the most demanding audio, video and broadcast professionals for over...
$839.95
Title

Descriptions

Furman ELITE-15 PF I, Conditioner Power HT 15A Power Factor

Furman ELITE-15 PFI has pioneered the development of AC power products for the most demanding audio, video and broadcast professionals for over 40 years. Furman ELITE-15 PFI  Power Factor I's technology and its unique implementation are revolutionary and without peer. The Furman ELITE-15 PFI  has extreme AC demands encountered in the professional audio/video arena have required technological developments far in excess of typical home theater/audiophile power products.

In studios, live sound and home theater/audiophile power products breakdown  is unacceptable and it is costly. Our solution based technology of the Furman ELITE-15 PFI has extesive engineering expertise and robust build quality have answered the challenge of today's corrupted power lines and led to the creation of the Furman ELITE-15 PHI.

Product Highlights of Furman ELITE-15 PFI

  • SMP provides the highest level of protection available
  • LiFT significantly reduces AC line noise
  • E.V.S. protects equipment from dangerous overvoltage conditions
  • Zero ground contamination circuitry protects critical digital components
  • Power Factor Technology provides over 45 amps peak charge surplus current for power-starved amplifiers
  • Retractable LED lamps illuminate a cabinet or rack full of equipment
  • 12 volt triggering for remote control
General
  • Family = Elite Series
  • Line Voltage = 120 (Volts)
  • Number of Outlets = 13
  • Number of Isolated Banks = 3
  • Outlet Descriptions

    1 (linearly filtered outlet, front panel)

    4 (linearly filtered audio-video outlets, 2 switched via 12V trigger)

    4 (linearly filtered outlets with additional ultrasonic filtering for video components, 2 switched via 12 V trigger)

    4 (Power Factor Technology amplifier outlets, 3 amps RMS reserve, reactive load, over 45 amps peak charge, 2 switched with 5 second delay via 12V trigger) 

  • Rack Mountable = Yes
  • Rack Ears Included = Yes
  • Front Panel Meter(s) = No
  • Front Media Light(s) = 2 Retractable LED lamps
  • Control = On/Off switch and light dimmer knob on front panel. 12 Volt triggering for remote control.
  • Voltage Regulation = No
  • Compliance = NRTL-C
  • USB Charging = N/A
  • Low Voltage Trigger = 12 V, In/Out
  • Dimensions = 4" H x 17" W x 14.75" D (Standard 2 RU height without feet)
  • Weight = 15 lbs
  • Power Consumption = 12 Watts for display and control circuits independent of actual load
AC Protection
  • AC Protection Technology = Extreme Voltage Shutdown
    Series Multi-Stage Protection
    Non-sacrificial protection with zero ground contamination
  • Under-Voltage Shutoff = 85V
  • Over-Voltage Shutoff = 140V ±3V
  • Maximum Current Rating = 15 (Amps)
  • Initial Clamping Level = 188 VAC peak @ 3,000 Amps
Filtration
  • Filtration Technology = LiFT
  • Filtration Rating

    >40 dB from 10Khz. - 100 kHz.

    >80 dB from 100 Khz. _ 1GHz.
    (Linear attenuation curve from 0.05 _ 100 ohms line impedance) 

  • Signal Line Protection = 1 Tel
    3 Cable/Satellite
Shipping Info
  • Length = 21.5 (Inches)
  • Width = 19.6 (Inches)
  • Height = 8.2 (Inches)
  • Weight = 20.3 (Lbs)
  • Unit of Measure = Each
  • UPC = 654061027829
  • Master Pack Qty = 1
Other Specifications
  • Voltage Protection Rating (UL 1449 3rd Edition, 3,000A)