Furman ELITE-20 PFI, Conditioner Power HT 20A Power Factor
Vendor: Furman
Available
Descriptions
Furman ELITE-20 PFI, Conditioner Power HT 20A Power Factor
For 40 year's the Furman ELITE-20 PFI has pioneered the development of AC power products for the most demanding audio, video and broadcast professionals. Even the need of pristine AC power in nothing new, Furman ELITE-20 PFI technology and its unique implementation are revolutionary and without peer.
Also, the Furman ELITE-20 PFI has an extreme AC demands encountered in the professional audio/video arena have required technological developments far in excess of typical home theater/audiophile power products. It is unacceptable for studios, live sound and broadcast facilities if breakdown happened. Our solution based technology is the Furman ELITE-20 PFI, it has an extensive engineering service and also a robust build quality, the answers for today's challenge in corrupted power lines and led to the creation of th Furman ELITE-20 PFI.
Product Highlights of the Furman ELITE-20 PFI
- SMP provides the highest level of protection available
- LiFT significantly reduces AC line noise
- E.V.S. protects equipment from dangerous overvoltage conditions
- Zero ground contamination circuitry protects critical digital components
- Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers
- Ultrasonic bi-filtering isolates digital and video circuits from analog components
- Retractable LED lamps illuminate a cabinet or rack full of equipment
- Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors
- 12 Volt triggering for remote control
- General
- Family = Elite Series
- Line Voltage = 120 (Volts)
- Number of Outlets = 13
- Number of Isolated Banks = 3
-
Outlet Descriptions
1 (Ultra-Linearly filtered outlet - front panel)
8 (Ultra-Linearly filtered outlets with additional ultrasonic filtering for either video or audio components, 4 with 12V triggering)
4 (Power Factor Technology amplifier outlets – 4.5 amps RMS reserve - reactive load - over 55 amps peak charge, 2 with 5 second delay via 12V triggering)
- Rack Mountable = Yes
- Rack Ears Included = Yes
- Front Panel Meter(s) = No
- Front Media Light(s) = 2 Retractable LED lamps
- Control = On/Off switch and light dimmer knob on front panel. 12 Volt triggering for remote control.
- Voltage Regulation = No
- Compliance = NRTL-C
- USB Charging = N/A
- Low Voltage Trigger = 12 V, In/Out
- Dimensions = 4" H x 17" W x 14.75" D (Standard 2 RU height without feet)
- Weight = 18 lbs
- Power Consumption = 12 Watts for display and control circuits independent of actual load
- AC Protection
-
AC Protection Technology = Extreme Voltage Shutdown
Series Multi-Stage Protection
Non-sacrificial protection with zero ground contamination - Under-Voltage Shutoff = 85V
- Over-Voltage Shutoff = 140V ±3V
- Maximum Current Rating = 20 (Amps)
- Initial Clamping Level = 188 VAC peak @ 3,000 Amps
- Filtration
- Filtration Technology = LiFT
-
Filtration Rating
Transverse (Differential) Mode:
> 40 dB from 5Khz. - 100 kHz.
>80 dB from - 100 kHz. – 1GHz.Common Mode:
>40dB from 10Hz. – 30 kHz.
>20 from 40 kHz. – 1MHz.
(Linear attenuation curve from 0.05 – 100 ohms line impedance) -
Signal Line Protection1 Tel
3 Cable/Satellite
- Shipping Info
- Length = 21.6 (Inches)
- Width = 19.7 (Inches)
- Height = 8.4 (Inches)
- Weight = 22.9 (Lbs)
- Unit of Measure = Each
- UPC = 654061027836
- Master Pack Qty = 1