Furman PL-PRO DMC, 20A Advanced Power Cond/Lights W/SMP & Digital Volt/Amp Meter, 9 Outlets, 1RU, 10Ft Cord

Descriptions

Furman PL-PRO DMC, 20A Advanced Power Cond/Lights W/SMP & Digital Volt/Amp Meter, 9 Outlets, 1RU, 10Ft Cord

The Furman PL-PRO DMC is a classic series that can brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Furman PL-PRO DMC is also a Furman's revolutionary Series Multi-stage Protection and Furman PL-PRO DMC has a Linear Filtering Technology (LiFT) and Extreme Voltage Shutdown (EVS). Together, these Furman PL-PRO DMC technologies comprise what is, without question, and Furman PL-PRO DMC is one of the world's most advanced and comprehensive transient voltage surge supressors.

Applications

INSTRUMENT RIGS

You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

RECORDING

Can't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.

DJ EQUIPMENT

Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off, to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.

PRO AUDIO

When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it's toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

General

• Family = Classic Series
• Line Voltage = 120 (Volts)
• Number of Outlets = 9
• Number of Isolated Banks = 2
• Outlet Descriptions = All 9 outlets linearly filtered and surge protected
• Rack Mountable = Yes
• Rack Ears Included = Yes
• Front Panel Meter(s) = LED voltmeter/ammeter displays incoming voltage and true RMS current draw
• Front Media Light(s) = 2 multi-LED, dimmable lamps
• ControlFront panel: 
  - On/Off switch 
  - Voltage meter dimmer button
• Voltage Regulation = No
• Compliance = cTUVus
• USB Charging = 1 front panel USB charger
• Low Voltage Trigger = N/A
• AC Power Cord = 10 ft, captive 3/12 AWG, with NEMA 20 plug
• Dimensions = 19" W x 10.5" D x 1.75" H
• Weight = 12 lbs
• Power Consumption = 12 Watts

AC Protection

• AC Protection Technology = Extreme Voltage Shutdown
  Series Multi-Stage Protection
  Non-sacrificial protection with zero ground contamination
• Under-Voltage Shutoff = 90V
• Over-Voltage Shutoff = 140 VAC
• Maximum Current Rating = 20 (Amps)
• Initial Clamping Level = 188 VAC peak @ 3,000 Amps

Filtration

• Filtration Technology = LiFT
• Filtration Rating = 10 dB @ 10 kHz
  40 dB @ 100 kHz
  50 dB @ 500 kHz
• Signal Line Protection = No
• Other Specifications
  • Response Time:1 nanosecond
  • Maximum Surge Current:6,500 amps
  • Construction:Steel chassis, .120" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards