Meyer Sound UPM-1P-WP-3, 2x5" Active Speaker, Weather Protection, 3/8"-16, 3-Pin Input
Vendor: Meyer Sound
Descriptions Meyer Sound UPM-1P-WP-3, 2x5" Active Speaker, Weather Protection, 3/8"-16, 3-Pin Input The Meyer Sound UPM-1P-WP-3 is a remarkably compact, self-powered, professional sound reinforcement loudspeaker system. It is ideally suited to applications requiring...
Available
Meyer Sound UPM-1P-WP-3, 2x5" Active Speaker, Weather Protection, 3/8"-16, 3-Pin Input
The Meyer Sound UPM-1P-WP-3 is a remarkably compact, self-powered, professional sound reinforcement loudspeaker system. It is ideally suited to applications requiring a relatively small and inconspicuous loudspeaker that can also provide high sound pressure levels, extremely low distortion, and uniform directional control. The Meyer Sound UPM-1P-WP-3 loudspeaker provides vocal-range reinforcement as a small PA system or as a fill or delay loudspeaker in larger indoor or outdoor systems. A full-range system can be created with the addition of an optional subwoofer.
Meyer Sound UPM-1P-WP-3 Main Features
- Exceptional fidelity and power capability delivered in an ultracompact package
- Wide, symmetrical pattern covers broad listening areas
- Unique crossover design eliminates combing for consistent midrange response
- Metal dome driver provides exceptionally smooth high-frequency characteristic
- Acoustic
- Operating Frequency Range: 75Hz – 20kHz
- Frequency Response: 80Hz – 16kHz ±4dB
- Phase Response 415Hz – 16kHz ±45°
- Linear Peak SPL: 118.5dB with crest factor >14dB (M-noise), 113dB (Pink noise), 115.5dB (B-noise)
- Coverage
- Horizontal Coverage: 100°
- Vertical Coverage: 100°
- Transducers
- Low Frequency: Two 5-inch cone drivers; 8Ω nominal impedance
- High Frequency: One 1-inch metal dome tweeter; 8Ω nominal impedance
- Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
- Connectors XLR 3-pin female input with male loop output; optional 5-pin connectors accommodate both balanced audio and RMS signals.
- Input Impedance: 10kΩ differential between pins 2 and 3
- Wiring
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal –
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0dBV (1.0V rms) continuous is typically the onset of limiting for noise and music
- Input Level Audio: source must be capable of producing of +20dBV (10V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Amplifier
- Type: Complementary MOSFET output stages (class AB/bridged)
- Total Output Power: 650W peak
- THD, IM, TIM: less than 0.02%
- Cooling: Convection
- AC Power
- Connector: powerCON input with loop output
- Voltage Selection External: 115/230VAC switch (100VAC version available)
- Safety Rated Voltage Range Input rating: 115/230VAC, 50–60 Hz, 3A MAX;
- Loop output rating: 115/230VAC, 50–60Hz, 12A MAX
- Turn-on and Turn-off Points Fuse-protected above 135VAC (115VAC switch position) and 265VAC (230VAC switch position)
- Current Draw
- Idle Current: 0.13A rms (115VAC); 0.065A rms (230VAC); 0.15A rms (100VAC)
- Maximum Long-Term Continuous Current (>10 sec): 1A rms (115VAC); 0.5A rms (230VAC); 1.2A rms (100VAC)
- Burst Current (
- Maximum Instantaneous Peak Current: 2.9A pk (115VAC); 2A pk (230VAC); 3.3A pk (100VAC)
- Inrush Current: 18A pk (115VAC); 12A pk (230VAC); 15A pk (100VAC)
- RMS Network (Optional)
- Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer.
- Physical
- Dimensions W: 6.85in (174mm) x H: 18.00in (457mm) x D: 7.70in (196mm)
- Weight: 22lbs (9.98kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with black mesh
- Rigging: Three 3/8in -16 or metric M10 nut plates
Related Product
Prev
Next
Meyer Sound PANTHER Large-Format Linear Line Array Loudspeakers
PANTHER Large-Format Linear Line Array Loudspeakers Can be paired with the Amazing Meyer 2100-LFC Subwoofer Engineered for Peak PowerNo other...
$19,850.00
Studiomaster V5S, 2x10" Active Sub Line Array Enclosure (Black)
Studiomaster V5S, 2x10" Active Sub Line Array Enclosure (Black) The Studiomaster V5S line array is a new development of a...
$1,155.00
$1,469.00
Studiomaster V5SA, 2x10" Active Sub Line Array Enclosure (Black)
Studiomaster 5SA, 2x10" Active Sub Line Array Enclosure (Black) The Studiomaster V5 line array is a new development of a...
$1,785.00
$2,309.00
Martin Audio MLX, Very high-performance 2x18" Subwoofer
Martin Audio MLX, Very high-performance 2x18" Subwoofer Class-leading output levels are achieved by combining Hybrid® horn/reflex loading with IPAL driver...
$22,000.00
Martin Audio MLD, Large-format, numerically-optimized multi celled downfill element for MLA.
Martin Audio MLD, Large-format, numerically-optimized multi-celled downfill element for MLA. The Martin Audio MLD Downfill is an important MLA System...
$22,000.00
Martin Audio MLA Compact, Medium-format, numerically optimized multi-celled array Speaker
Martin Audio MLA Compact, Medium-format, numerically optimized multi-celled array Speaker The Martin Audio MLA Compact brings award-winning Multi-cellular Loudspeaker Array...
$13,000.00
Martin Audio MLA, Large-format numerically-optimized multi celled array Speaker
Martin Audio MLA, Large-format numerically-optimized multi-celled array Speaker The Martin Audio’s revolutionary award-winning Multi-cellular Loudspeaker Array [MLA] technology is reinventing...
$22,000.00
RCF HDL50-A Active Large Format 3-way Line Array Speaker (4,400 Watts)
RCF HDL50-A Active Large Format 3-way Line Array Speaker (4,400 Watts) The RCF HDL50-A is a professionally designed true active...
$9,999.00
RCF HDL50-A-4K Active Large Format 3-way Line Array Speaker (8,000 Watts)
RCF HDL50-A-4K Active Large Format 3-way Line Array Speaker (8,000 Watts) The RCF HDL50-A-4K is a professionally designed active 3-way...
$11,999.00
RCF HDL30-A Active Dual 10" Line Array Speaker Powered
RCF HDL30-A Active Dual 10" Line Array Speaker Powered The RCF HDL30-A is a professionally designed 2-way active compact bi-amped touring...
$6,799.00
RCF HDL28-A (Black) / HDL28-A W (White) Active Dual 8" Line Array Speaker Powered
RCF HDL28-A (Black) / HDL28-A W (White) Active Dual 8" Line Array Speaker Powered The RCF HDL 28-A comes in two...
$4,499.00
RCF HDL35-AS (Black) / HDL35-AS W (White) Active Compact Flyable Subwoofer Powered Speaker
Description RCF HDL35-AS (Black) / HDL35-AS W (White) Active Compact Flyable Subwoofer Powered Speaker The RCF HDL35-AS for Black and HDL35-AS W...
$4,499.00
RCF HDL26-A (Black) / HDL26-A W (White) Active Compact 2-way Lina Array Powered Speaker
Description RCF HDL26-A (Black) / HDL26-A W (White) Active Compact 2-way Lina Array Powered Speaker The HDL6-A comes in different color...
$3,699.00
Meyer Sound MM-4XP-3, 4" Active Speaker, 3-Pin Input
Descriptions Meyer Sound MM-4XP-3, 4" Active Speaker, 3-Pin Input The Meyer Sound MM-4XP-3 is a self-powered miniature loudspeaker (with IntelligentDC...
$0.00
Meyer Sound MM-4XP-3-PLENUM, 4" Active Speaker, Plenum Pigtail, 3-Pin Input
Descriptions Meyer Sound MM-4XP-3-PLENUM, 4" Active Speaker, Plenum Pigtail, 3-Pin Input The Meyer Sound MM-4XP-3-PLENUM is a self-powered miniature loudspeaker...
$0.00
Meyer Sound MM-4XPD-3, 4" Active Speaker, Hypercardioid, 3-Pin Input
Descriptions Meyer Sound MM-4XPD-3, 4" Active Speaker, Hypercardioid, 3-Pin Input The Meyer Sound MM-4XPD-3 is a self-powered miniature loudspeaker (with...
$0.00