Meyer Sound ULTRA-X42-RMS-3, 2x8" 2-Way Active Speaker, RMS, 3-Pin Input

Meyer Sound ULTRA-X42-RMS-3, 2x8" 2-Way Active Speaker, RMS, 3-Pin Input

The Meyer Sound ULTRA-X42-RMS-3 is a designs that continue the tradition of the highly successful UPA loudspeaker that so very versatile and have been a universal standard in almost every application for over 35 years. The Meyer Sound ULTRA-X42-RMS-3 is perfectly suited for touring performances to theme parks, worship venues to theater shows, and lecture halls to large scale concerts. The Meyer Sound Technology has delivered exceptional fidelity with high power, low distortion and uniformly predictable behavior.

Meyer Sound ULTRA-X42-RMS-3 Main Features

• Exceptional fidelity and surprising power capability delivered in a compact, light enclosure
• Extraordinarily flat amplitude and phase response ensures tonal accuracy and precise imaging
• Wide (ULTRA-X40) or Controlled (ULTRA-X42) pattern
• Rotatable horn provides installation flexibility
• Integral stand mount and QuickFly® mounting options facilitate rigging

• Acoustic
• Operating Frequency Range: 55Hz – 19.5kHz
• Frequency Response: 58Hz – 18kHz ± 4dB
• Phase Response: 90Hz – 19.5kHz ±45°
• Linear Peak SPL:
• 134dB with 18.5dB crest factor (M-noise),
• 132dB (Pink Noise), 13 dB (B-noise)
• Coverage: Rotatable horn: 70° x 50°
• Transducers
• Low Frequency Two 8-inch cone drivers; 4Ω nominal impedance
• High Frequency One 3-inch diaphragm compression driver connected to a rotatable horn; 8Ω nominal impedance
• Audio Input
• Type: Differential, electronically balanced
• Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
• Connectors: XLR 3-pin female input with male loop output; optional XLR 5-pin connector to accommodate both balanced audio and RMS signals.
• Input Impedance: 10kΩ differential between pins 2 and 3
• Wiring
• Pin 1: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
• Pin 2: Signal +
• Pin 3: Signal –
• Pin 4: RMS (polarity insensitive)
• Pin 5: RMS (polarity insensitive)
• Case: Earth ground and chassis
• Nominal Input Sensitivity: 0dBV (1.0V rms) continuous is typically the onset of limiting for noise and music
• Input Level Audio: source must be capable of producing of +20dBV (10V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
• Amplifier
• Type: 3-channel, Class-D
• Total Output Power: 1950W peak
• THD, IM, TIM: less than 0.02%
• Cooling: Convection
• AC Power
• Connector: powerCON 20 input with loop output
• Automatic Voltage Selection: 90–265VAC, 50–60Hz
• Safety Rated Voltage Range: 100–240VAC, 50–60Hz
• Turn-on and Turn-off Points: 90VAC turn-on, no turn-off; internal fuse protection above 265VAC
• Current Draw
• Idle Current: 0.27A rms (115VAC); 0.25A rms (230VAC); 0.29A rms (100VAC)
• Maximum Long-Term Continuous Current (>10 sec): 1.9A rms (115VAC); 1.0A rms (230VAC); 2.2A rms (100VAC)
• Burst Current ( less than 1 sec): 3.1A rms (115VAC); 1.5A rms (230VAC); 3.4A rms (100VAC)
• Maximum Instantaneous Peak Current: 6.9A rms (115VAC); 3.4A rms (230VAC); 7.9A rms (100VAC)
• Inrush Current: less than 20A peak
• RMS Network
• Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer.
• Physical
• Dimensions W: 12.51in (318mm) x H: 22.31in (567mm) x D: 14in (356mm); D with handles: 15.38in (391mm)
• Weight: 52lbs (23.6kg)
• Enclosure: Premium multi-ply birch with slightly textured black finish
• Protective Grille: Powder-coated, round-perforated steel
• Rigging: 11 integrated M8 threaded points; 35mm Pole Mount with M20 thread; optional accessories for various rigging options (see accessories section).