Presonus ULT10 2-Way 10" Active Sound-Reinforcement Loudspeaker
Vendor: Presonus
Available
Presonus ULT10 2-Way 10" Active Sound-Reinforcement Loudspeaker
The ULT10 designed by PreSonus is a 2-way 10" active loudspeaker with a wide 110° horizontal and a 50° vertical dispersion horn for delivering even coverage and an ultra-long throw. The ULT10 is featured with 1300W of Class-D power (peak) and can be used as monitors in applications for sound reinforcement, DJ setups, PA systems, and more.
Featuring a custom low-frequency driver with a 2.5" voice coil and a 1.75" voice coil exit horn, The speaker is built with an onboard mixer with two combo XLR-1/4" input jacks and an XMAX preamp. The rotatable waveguide-Pivot X110 horn offers precise coverage. Also, there are 3 operation-mode presets for the following: for normal live setups, Front of House (FOH); DJ; for music playback, and Mon; when using it as a wedge monitor.
Main Components
- 10-inch custom woofer with 2.5-inch voice coil
- WorxAudio-designed waveguide Pivot X110 horn for precise coverage
- Ultra-wide 110Ë¿ horizontal dispersion
- Tight 50Ë¿ vertical dispersion for longer throw
- 1300W Class D power (150x500W continuous)
- XMAX preamp
- Onboard mixer with two combo XLR-1/4" inputs
- Direct line-input channel output
- Single summed balanced output
Controls
- Mic/Line Level
- Line/Level
- 3 operation mode presets
- FOH: Normal live front of house
- DJ: Music playback
- Mon: Stage wedge floor monitor
- HPF On/Off
- Front LED On/Off
- Multi-angle enclosure for mains or monitor wedge application
- Defeatable front-panel LED
- Rugged, texture-painted eucalyptus plywood enclosures
- Tour-grade 16-gauge steel grille
- Comfortable ergonomic handles
- 35mm pole sockets with 6° downward tilt
- Integrated M10 rigging points for suspended horizontal and vertical installation
- Locking IEC connection
PreSonus ULT10 Specs
PA Speaker- Configuration: Active 2-Way
-
Total Power Capacity: 1300 W Peak
650 W RMS -
Amplifier Power Rating: LF:
1000 W Peak
500 W RMS
HF:
300 W Peak
150 W RMS
Drivers
- HF Voice Coil: 1.75" / 4.44 cm
- LF Driver: 1 x 10" / 25.4 cm Woofer
- LF Voice Coil: 2.5" / 6.35 cm
Performance
- Frequency Range: 20 Hz to 20 kHz
-
Frequency Response: 60 Hz to 18 kHz -3 dB
55 Hz to 20 kHz -10 dB - Maximum SPL: 130 dB
- Coverage Angle: 110° H x 50° V
- Max Input Level: +22 dBu
-
I/O Impedance: Line Input:
10 Kilohms
Mic Input:
1 Kilohms - THD: <0.05%
- Protections: DC Fault, Overcurrent, Overvoltage, Thermal, Undervoltage
Connectivity
-
Audio I/O: 2 x Combo XLR-1/4"
1 x Combo XLR-1/4" Line/Mic Input
1 x Combo XLR-1/4" Line Input
2 x XLR Male Output
Signal Processing
- Crossover: 1.6 kHz
-
Filters: High-Pass:
100 Hz, 24 dB/Octave Linkwitz-Riley - Dynamic Processing: HF Limiter, Limiter
- Max Sample Rate/Resolution: 96 kHz / 24-Bit
Power
- AC Input Power: 100 to 230 VAC, 50 / 60 Hz
- Power Consumption: 150 W (1/8 Power)
Physical
-
Mounting: 1 x 1.4" / 35 mm Pole Socket (Dual Angle)
12 x M10 -
Handles: 1 x Top
1 x Side - Cooling: Convection
- Construction Material: Metal Grille, Plywood
- Dimensions: 22 x 13.2 x 11.9" / 558.8 x 335.3 x 302.3 mm
- Weight: 44 lb / 20 kg