Turbosound (iQ10 [10''] / iQ12 [12"] / iQ15 [15"]) 2,500 Watt 2 Way Loudspeaker with KLARK TEKNIK Digital Signal Processing (EACH CAN BE AVAIL SEPARATELY)

Vendor: Turbosound
Description Turbosound (iQ10 [10''] / iQ12 [12"] / iQ15 [15"]) 2,500 Watt 2 Way Loudspeaker with KLARK TEKNIK Digital Signal Processing (EACH CAN BE AVAIL SEPARATELY) The IQ-10 (10"); IQ-12 (12"); IQ-15 (15") 2500W 2-Way Speaker...
$799.00
Size

Turbosound (iQ10 [10''] / iQ12 [12"] / iQ15 [15"]) 2,500 Watt 2 Way Loudspeaker with KLARK TEKNIK Digital Signal Processing (EACH CAN BE AVAIL SEPARATELY)

The IQ-10 (10"); IQ-12 (12"); IQ-15 (15") 2500W 2-Way Speaker Systems that are professionally crafted by Turbosound are all an ULTRANET equipped digital loudspeaker, all of them are part of the Turbosound iQ Series. These are made capable to be used along with ULTRANET-enabled products, such as personal monitor systems and digital mixers, and the other iQ Series loudspeakers and subwoofers. The ULTRANET-enabled system is made devoid of ground loops and interference problems, and with these you can get pristine, crystal-clear audio with the use of of multi-channel and an all-digital signal distribution. 

These come featuring an onboard 2-channel mixer, USB-addressable DSP, 2,500W Class-D power amplifier, and Turbosound-designed low/high-frequency drivers, the IQ-10 / IQ-12 / IQ-15 speakers are all capable of delivering sound that is smooth, crisp with punch, and come with natural detail. These are made equipped with KLARK TEKNIK DSP processing, which is ensuring the total system control and driver protection, and is featuring a phase/time-correction crossover, EQ, noise gate, automatic feedback eliminator, and much more for maintaining the optimal performance. The setup is capable to be done directly at the rear panel LCD, or remotely with the use of a PC and Turbosound's free software download. In addition to the two combination balanced XLR-1/4" jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the IQ Series comes featuring a mic/line switch and level control along with signal present LED on each channel.

Built with integrated fly-points, the cabinet is capable to be suspended with the use of an optional hardware or ground stacked on its subwoofers (sold separately) to suit any venue for permanent installation. Finally, lightweight and powerful, the IQ Series speaker system is suitable for both speech and music applications.

  • Ultra-high power, 2-way sound reinforcement speaker system
  • Lightweight and fiberglass reinforced composite enclosure provides excellent sound even at extreme sound pressure levels
  • High-acceleration 10" / 12" / 15" low-frequency driver provides deep bass and acoustic power
  • 1" titanium-diaphragm compression driver for exceptional high-frequency reproduction
  • Advanced KLARK TEKNIK digital signal processor for ultimate system control and speaker modeling
  • Digital crossover, EQ, phase and time correction, and Automatic Feedback Eliminator
  • Direct-access LCD management and full USB remote control via PC or Mac computer
  • ULTRANET digital audio network connects to mixers and other sources
  • 2 XLR-1/4" Mic/Line inputs with individual volume controls and peak LEDs
  • Mix output enables linking of additional speaker systems
  • Versatile trapezoidal enclosure design allows different positioning - stand mounting with dual 35mm pole sockets; tilts on its side for use as a floor monitor; M10 fly points, pull backs and yoke-mount options
PA Speaker
Configuration 2-Way
Total Power Capacity 2500 W
Amplifier Class Class-D
Drivers iQ10
HF Driver 1 x 1" / 51 mm Titanium Compression Driver
LF Driver 1 x 10" / 254 mm Woofer
Drivers iQ12
HF Driver 1 x 1" / 51 mm Titanium Compression Driver
LF Driver 1 x 12" / 305 mm Woofer
Drivers iQ15
HF Driver 1 x 1" / 51 mm Titanium Compression Driver
LF Driver 1 x 15" / 387 mm Woofer
Connectivity
Audio I/O 2 x Combo XLR-1/4" Line/Mic
USB 1 x USB Type-B (Host Connection)
Power
AC Power Connector 1 x powerCON Input
1 x powerCON Output
Physical
Mounting 2 x 1.38" / 35 mm Pole Socket