Presonus CDL18S 18" 2000W Active Flyable, Compact Subwoofer, w/Dante

Presonus CDL18S 18" 2000W Active Flyable, Compact Subwoofer, w/Dante, Integrated Rigging and DSP Control

Designed for articulated sub-bass frequency reproduction, the PreSonus CDL18s Dante-Enabled Active Subwoofer is delivering a high-output and controlled performance in sound-reinforcement applications for theater, live stage, clubs, and more. The CDL18s by PreSonus utilizes a 2000W (peak) Class-D amplifier to power the 18" woofer with a 4" voice coil, delivering a frequency response of 42 HZ-150 Hz with a peak SPL of 135 dB.

The driver and voice coil offer 7mm of driver travel before reaching over-excursion. The 15mm eucalyptus plywood enclosure is coated a powder-coated steel grille, with a Chemline polyurea finish and offers XLR input and output with polarity invert. The PreSonus CDL18s easily ground stacks for simplified deployment and up to two subs may be flown with five CDL12 full-range tops for a complete line-array/point source sound system.

• Tight, coherent low-end
• 18" woofer with 4" voice coil
• 2000W peak Class-D amplifier
• XLR input with XLR direct output
• 7mm driver travel before over-excursion
• Chemline polyurea finished eucalyptus plywood enclosure with powder-coated steel grille
• Integrated rigging hardware for easy deployment of fly-rigs and ground stacks
• Two handles for ease in transport
• Optional caster kit and CDL rigging kit available

PreSonus CDL18S Specs

PA Speaker

• Configuration: Active Subwoofer
• Total Power Capacity: 2000 W Peak
  1000 W Program
  500 W RMS

Drivers

• LF Driver: 1 x 18" / 45.7 cm Woofer
• LF Voice Coil: 4" / 10.2 cm
• Magnet: Ferrite

Performance

• Frequency Range: 20 Hz to 20 kHz
  36 Hz to 144 Hz -10 dB
• Frequency Response: 42 Hz to 150 Hz -3 dB
• Maximum SPL: 135 dB
• Max Input Level: +4 dBu
• I/O Impedance: Input:
  40 Kilohms
• THD: <0.05%
• Protections: DC Fault, Overcurrent, Overvoltage, Thermal, Undervoltage

Connectivity

• Audio I/O: XLR Line Input
  XLR Output
• Network I/O: 1 x etherCON (Control)

Signal Processing

• Crossover: 90 Hz
• EQ: Yes
• Dynamic Processing: Compression, HF Limiter, Limiter
• Alignment Delay: Yes
• Phase Adjustment: Yes
• Max Sample Rate/Resolution: 48 kHz / 24-Bit

Power

• AC Input Power: 90 to 260 VAC, 50 / 60 Hz 
• AC Power Connector: 1 x powerCON Input
  1 x power CON Output
• Current Consumption: 4.2 A (1/8 Power)

Physical

• Mounting: 1 x M20 (Top)
• Handles: 2 x Side
• Cooling: Convection
• Construction Material: Metal Grille, Plywood
• Dimensions: 23.2 x 20.8 x 24" / 589.3 x 528.3 x 609.6 mm
• Weight: 105 lb / 47.6 kg