Sony Professional ECM-66B, Miniature cardioid directional lapel Electret condenser microphone
Vendor: Sony
Available
Sony Professional ECM-66B, Miniature cardioid directional lapel Electret condenser microphone
The Sony Professional ECM-66B Lavalier Condenser Microphone design yields a clean, natural reproduction of voice or musical instruments while maintaining suitable isolation from the acoustic environment. Unlike most miniature microphones, this mic has a cardioid polar pattern carefully contoured for better feedback control. The higher voltage supplied to the microphone by the built-in DC to DC converter increases the maximum input sound pressure level to 130 dB SPL. This construction also complements the electret condenser design, resulting in excellent transient response and thus better tonal quality. For added versatility, the Sony Professional ECM-66B can be powered by a single AA battery or external 48V phantom power. The battery on/off switch on the power supply helps to save the battery. An LED illuminates to show the battery condition when power is turned on.
Designed for a wide range of audio sources
The Sony Professional ECM-66B's capsule features an extended frequency response and it can handle high SPL signals
Ready for wired applications
The Sony Professional ECM-66B is the wired microphone version with an XLR output and integral power supply barrel. It can either be powered by the external microphone amp or an internal battery (LR6/AA size).
Compact size
The capsule has a diameter of only 10.6mm and is 24mm long, making it easy to conceal.
Sony Professional ECM-66B Main Features
- Electret Condenser
- Cardioid Polar Pattern
- Runs on AA Battery or +48V Phantom Power
- 70 Hz to 14 kHz Frequency Response
- 9.8' Long Cable
- Includes Foam Windscreen
- Vertical and Horizontal Tie Clips
- Microphone Case
- 2-way powering—AA-size battery or 48V phantom power
- 130 dB maximum input sound pressure level
- Designed for voice or instrumental applications
- Complete with in-line battery unit for 2-way powering
Transducer | Electret Condenser |
Polar Pattern | Cardioid |
Frequency Response | 70 Hz to 14 kHz |
Dynamic Range (Typical) | > 101 dB |
Signal-to-Noise Ratio | > 65 dB, (@ 1 kHz) |
Maximum Input Sound Level | 130 dB |
Power Requirements | AA Battery (1.5 V), or Phantom |
Output Impedance | 100 Ohms ±20% (1 kHz) |
Output Connectors | XLR-3M Type |
Pad | None |
Low-Frequency Roll-Off | None |
Dimensions | Microphone: 1.0 x 0.4" / 24.2 x 10.6 mm Power Supply: 6.4 x 0.8" / 163 x 20 mm Cable: 10' x 0.1" / 3 m x 2.3 mm |
Weight | Microphone: .25 oz / 7 g Power Supply: 4.2 oz / 120 g |