Sony Professional ECM-674/9X, Shotgun Microphone

Vendor: Sony
Sony Professional ECM-674/9X, Shotgun Microphone With a form and tone well suited for event video shoots, indie film production, TV and documentary shooting, courtroom depositions, and more, the Sony Professional ECM-674/9X shotgun microphone...
$449.00
Title

Sony Professional ECM-674/9X, Shotgun Microphone

With a form and tone well suited for event video shoots, indie film production, TV and documentary shooting, courtroom depositions, and more, the Sony Professional ECM-674/9X shotgun microphone offers a strong, clean output signal for recording with camcorders, multitrack field recorders, and portable audio recorders. The Sony Professional ECM-674/9X features a super-cardioid polar pattern for excellent directivity and minimal noise at the off-axis sections of the capsule, resulting in intelligible voice pickup even in noisy environments. The microphone's wide, flat frequency response yields smooth, accurate signal reproduction with crisp detail and minimal coloration. The Sony Professional ECM-674/9X can be powered with a single AA battery (available separately) or 40 to 52 VDC phantom power, making it compatible with a variety of consumer and professional devices. It includes microphone spacers and a mic holder to accommodate camera-mount and stand-mount configurations.

Lightweight Design

The ECM-674 has been designed as a highly directional and lightweight shotgun microphone, measuring 10.6" in length and weighing 6.5 ounces to ensure good balance even when mounted on compact camcorders.

Smooth Frequency Response

With its flat and wide frequency response of 40 Hz to 20 kHz, the ECM-674 provides sound reproduction that is smooth and natural.

High Sensitivity

The ECM-674 offers an excellent sensitivity of -36 dB and a low self-noise level of less than 17 dB SPL, allowing the microphone to be used for clear voice capture even in noisy environments.

Onboard Low-Cut Filter

The onboard two-position (M, V) low-cut switch provides users with a simple method of reducing the effects of undesired ambient noise such as rumble.

AA Battery or Phantom Powered

The two-way powering capability allows the ECM-674 to be driven by 40 to 52 VDC phantom power or a single AA battery, making it suitable for both camcorder mounting and many other sound-gathering applications.

Built-In Battery Liquid Leakage Protection Circuit

Considering that old batteries can leak and damage the equipment they power, the ECM-674 prevents this by continually detecting the output voltage of the battery and shutting off the power supplied to the electric circuit whenever the voltage drops beneath a certain threshold.

Included Accessories

The ECM-674 is supplied with a windscreen that attenuates wind noise by approximately 5 dB, a short XLR cable, a microphone holder (for use on a mic stand), two stand adapters, a molded-type microphone spacer, and a sheet-type microphone spacer.

Sony Professional ECM-674/9X Main Features

  • For Indie Films, TV & Documentaries
  • AA Battery or Phantom Powered
  • Switchable Low-Cut Filter
  • High Sensitivity Requires Less Gain
  • Smooth Tone for Voice Reproduction
  • Built-In Battery Leakage Protection
  • Lightweight Housing
  • Windscreen Reduces Wind Noise
  • XLR Cable, Mic Spacers & Mic Holder
Microphone
Form Factor Stand/Boom Mount
Sound Field Mono
Operating Principle Pressure Gradient
Capsule 1 x Electret Condenser
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter Yes
Tone Adjustment None
Indicators None
On-Board Controls High-Pass Filter
Windscreen Foam (Included)
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 124 dB SPL (Phantom Power, 1 kHz, 3% THD)
115 dB SPL (Battery Power, 1 kHz, 3% THD)
Off-Axis Rejection 5 dB at 60°
>17 dB at 120°
>13 dB at 180°
Impedance 220 Ohms ± 20% at 1 kHz (Balanced)
Sensitivity -36 dBV/Pa at 1 kHz
Dynamic Range 107 dB (Phantom Power)
98 dB (Battery Power)
Signal-to-Noise Ratio 77 dB A-Weighted (1 kHz)
Equivalent Noise Level 17 dB SPL
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male
Headphone Connector None
Cable Length 19.69" / 50 cm
Power
Operating Voltage 40 to 52 V (Phantom Power)
1.5 V (Battery Power)
Operating Current Consumption 2 mA (Phantom Power)
0.6 mA (Battery Power)
Battery Type 1 x AA
Physical
Mounting Mic Clip (Included)
Operating Temperature 32 to 122°F / 0 to 50°C
Storage Temperature -4 to 140°F / -20 to 60°C
Dimensions ø: 0.79 x L: 10.55" / ø: 20 x L: 268 mm
Weight 6.53 oz / 185 g