Electro Voice MB200 / Electro Voice MB200W Wall/ceiling U-bracket kit for Sb122, Sb122PI, Sx100 and Sx300, black / white

Electro Voice MB200 / Electro Voice MB200W Wall/ceiling U-bracket kit for Sb122, Sb122PI, Sx100 and Sx300, black / white

The Electro Voice MB200, or the Electro Voice MB200W, installation kit is designed consisting of a U-bracket, two M8 x 1.25 hex-head bolts, four lock washers, two friction pads, and two ⅜-24 hex-head bolts. The kit is professionally created capable for accommodating the System 200 installation in a lots of variety of ways.

Wall or Ceiling Mounting

The Electro Voice MB200 installation bracket comes with a robust design that is allowing the System 200 speakers to be mounted in almost any position obtaining the desired sound coverage.

Flying Installations

The Electro Voice MB200 bracket is capable of capturing the speaker in a rigid frame which has structurally sound locations for attaching rigging hardware. These attachment points are 12.7-mm (½-in) diameter holes that can be found on the ends of the bracket. A ⅜-in "quick link" (or similar hardware) is able to be readily connected to each attachment point. System 200 speakers can be flown individually in either a horizontal or vertical position, or two speakers can be flown together in a vertical position.

System 200 Horizontal Arrays

Arrays of two to six speakers are securely supported in a frame comprised of Mb200 and Mb300 brackets. To create a horizontal array, two Mb200 brackets are simply locked into the correct alignment position using the brackets from the Mb300 Horizontal Array Kit. The array is extended by using one additional Mb200 bracket and one Mb300 kit for each additional speaker. To complete the circle for a six speaker array, one additional Mb300 kit is required.