FREE CHURCH DESIGNS
Call us 1-877-477-6432 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
Neumann KH 750, Active DSP Subwoofer, 10" driver, 48.4 liters, 256 W, 105 dB SPL
Vendor: Neumann
Neumann KH 750, Active DSP Subwoofer, 10" driver, 48.4 liters, 256 W, 105 dB SPL, 18 - 300 Hz, metallic anthracite. Includes (1) KH 750 DSP D G and (3) Mains cables (EU, UK, US)
The Neumann KH 750 is the best and ideal choice for smaller rooms and smaller studio monitors. It has a unique and flexible Bass Manager (2.0/0.1), analog and digital inputs, four routing modes and adaptable acoustical controls to be used in many different configurations. Also, the optional Neumann.Control iPad®app gives access to many additional functions. This also includes the possibility of aligning Neumann monitors, that are connected to the subwoofer, to the room using the patented "Guided Alignment" and controlling the entire stereo system. It also includes analog monitors.
MORE ABOUT THE KH 750 DSP
The newly designed 10” long-throw driver has a strong linear working magnet system with ELFF™ technology (Extremely Linear Force Factor™). As subwoofers are usually placed on the floor, a robust grille protects the driver from accidental damage. The ultra-compact cabinet is a closed design which brings the fastest possible transient response. The two analog XLR inputs are balanced as are the two analog XLR outputs. The 192 kHz / 24-bit digital input can accept AES3 and S/P-DIF signals. There is a bypassable standby function and the switch-off time can be adjusted in the Neumann.Control iPad® app. The KH 750 DSP can be used in music, broadcast, and post production studios for tracking, mixing, and mastering.
- Compact ultra stiff wooden cabinet
- In-house modelled long-throw bass driver with Extremely Linear Force Factor™ (ELFF™) and robust built-in grille
- 2.0/ 0.1 Bass Management
- Four routing modes
- XLR electronically balanced analog inputs and outputs
- Wide range input gain and output level controls / 8-position phase control, continuous low cut control
- Universal switched-mode power supply (100 … 240 V)
- Ground lift
- Low heat dissipation amplifiers with large headroom and sophisticated protection circuitry / Separate thermo limiter to protect the voice coil and power amplifier
- Digital input and output
- Network connector using standard IP protocol and your existing network infrastructure
- Control function
- Standby function
Neumann KH 750 Main Features
-
Deep bass in a small space
-
The perfect complement to KH 80 DSP, KH 120 and KH 310
-
Optional Neumann.Control iPad® app to setup, align and operate a complete Neumann stereo system
| THD+N: analog, digital | < -100 dB; < -90 dB |
| Free field frequency response ±6 dB | 16 … 800 Hz |
| Free field frequency response ±3 dB | 18 … 750 Hz |
| Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) | <20 dB(A) NPS |
| Sine wave output with a THD < 0.5 % at 1 m in half space | 95 dB SPL (>70 Hz) |
| Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) | 105.0 dB SPL |
| Analog input(s) | 2 x XLR: analog electronically balanced |
| Analog input impedance | >13k Ohms |
| Max. input level | < +24 dBu |
| Common mode rejection ratio (CMRR) | > 56 dB @ 15 kHz |
| Crosstalk (1 kHz), level matching | < -90 dB; ±0.1 dB |
| Volume control | via Neumann.Control software |
| Volume control range; resolution | 0 … -∞ dB; 0.1 dB |
| Analog dynamic range; THD+N | 119 dB(A); <0.003% (-90 dB) |
| Signal routing modes | Right; External Bass Management; 2 x LFE |
| Analog output(s) | 2 x XLR; analog electronically balanced |
| Input gain control (sensitivity) | +2 ... -12 dB |
| Output level control (output level in 1 m based on 0 dBu input level) | 94; 100; 108; 114 dB SPL |
| Digital input(s) | BNC (75 Ω): AES3; S/P-DIF |
| Digital output(s) | BNC (75 Ω): AES3 |
| Digital converter: resolution; design | 16 … 24-bit DAC; Δ∑ |
| Digital converter: sampling rate | 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz |
| Dynamic range A-D-A | >120 dB(A) |
| Dynamic range D-A | >123 dB(A) |
| Digital sensitivity | -18 dBFS = 100 dB SPL at 1 m |
| Latency | 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase) |
| Delay: User adjustable delay range | 0 ... 100 ms and 2 x 0 ... 20.8 ms |
| Delay: Resolution: time; distance | 0.1 ms; 3.44 cm (1 3/8”) |
| Delay: Max. frames Audio-video synchronisation (lip sync) | 2.5 (40 ms) frames; 3 (33 ms) frames |
| Delay: Time-of-flight maximum distance | 2 x 7.16 m (23' 5") |
| Controller design | Digital; active |
| Crossover frequency | 80 Hz |
| Crossover slope | 24 dB/oct; 4th order |
| Phase | 0; 45; 90; 135 und 0/180 deg |
| Equalization: via Neumann.Control software | 8 x full parametric IIR + low / high shelf global balance |
| FIR phase correction | For connected analog loudspeakers: Linear phase (170 Hz ... 16 kHz; +/- 45°) |
| Protection circuitry | Driver (thermo limiter); Electronics (temperature limiter); Amplifier (peak limiter, temperature limiter, temperature protection and overcurrent protection); Power supply (temperature limiter and overcurrent protection) |
| Infrasonic filter: frequency; slope | 17.5 Hz; 12 dB/oct. |
| Remote control | Neumann.Control software via an RJ45 connector carrying standard IP data |
| Display: On; Normal Operation | Green LED |
| Display: Identification | Amber LED |
| Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute | Red LED |
| Display: Bass Management on | Green LED |
| Output power woofer amplifier (THD+N with limiter deactivated: 10%) | 256 W |
| Mains Power Supply: input voltage; frequency | 100-240V; 50/60 Hz |
| Power consumption (230 V / 100 V): Standby | <300 mW |
| Power consumption (230 V / 100 V): Idle | 18 W |
| Power consumption (230 V / 100 V): Full output | 410 W |
| In-rush current (Peak) | 30 A @230 VAC |
| Standby | Disabled; 90 mins (default); user defined in software |
| Cabinet material | Wood cabinet, aluminum electronics panel |
| Cabinet surface finish; color (front / back) | Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
| Operating conditions | +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
| Transport/storage conditions | -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
| Woofer | 265 mm (10") with protecting black metal grille |
| Product dimensions (height x width x depth) | 383 x 330 x 383 mm (15 1/8" x 13" x 15 1/8") |
| External net volume | 48.4 liters |
| Product weight | 19.5 kg (43 lbs) |
