Presonus R80 8" AMT Powered Studio Monitor

Vendor: Presonus
Presonus R80 8" AMT Powered Studio Monitor    The PreSonus R Series R80 AMT Monitor is featured with a custom 6.8in2 Air Motion Transformer (AMT) tweeter that responds to subtle waveforms and high-frequencies. This permits you to...
$429.95 $599.95
Title

Presonus R80 8" AMT Powered Studio Monitor   

The PreSonus R Series R80 AMT Monitor is featured with a custom 6.8in2 Air Motion Transformer (AMT) tweeter that responds to subtle waveforms and high-frequencies. This permits you to hear the air and the greater sense of space that is characteristic of audiophile recordings. The R80's transparent and accurate sound makes it great to be used in both commercial and home recording studios as well as broadcast and post-production environments.

In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with liquid to raise their mass, sacrificing transient response time. By contrast, the AMT tweeter in the R80 uses a thin, folded Kapton membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, permitting the tweeter to move at the same instant of time as the electric current. The leading reactive response time provides marked clarity and better transient reproduction.

Components and Construction

  • 2-way active AMT design provides articulate high-frequency response and wide stereo imaging
  • Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtle waveforms and the high-frequencies
  • 8" Kevlar LF driver provides transparent mid- and low-frequency reproduction
  • Balanced XLR, 1/4" TRS, and an unbalanced RCA inputs provide flexibility
User Controls
  • Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement
  • Volume range A-type taper
  • HF control settings (Linear,+1, -3, -6 dB)
  • Low-cut settings (Linear, 60 Hz, 80 Hz, 100 Hz)
Power and Safety
  • Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
  • RF interference, output-current limiting, over temperature, turn-on/off transient, and subsonic filter protection
  • Energy Conservation Mode (with enable/disable) lowers standby power to < 0.5W
  • External mains fuse
  • Internal power supply with IEC connector

PreSonus R80 Specs

Studio Monitor

  • Monitor Type: Active 2-Way
  • Enclosure: Bass-Reflex, Shielded
  • Drivers: HF Driver: 1 x 6.8" / 17.27 cm Tweeter
    LF Driver: 1 x 8" / 20.32 cm Kevlar Cone
  • Amplification: HF Amplifier: Class-D Rated at 50 W
    LF Amplifier: Class-D Rated at 100 W

Performance

  • Frequency Range: 40 Hz to 22 kHz
  • Maximum Sound Pressure Level (SPL): 107 dB
  • Signal-to-Noise Ratio: 100 dBA
  • Protections and Limiting: Fuse, Output Current Limiting, Peak Limiter, Subsonic Filter, and Thermal Limiting

Signal Processing

  • EQ: 1 x HF Shelf: -4 to +1 dB at 2 kHz
    1 x Low-Mid Shelf: -6 to 0 dB at 250 Hz
  • Filters: High-Pass at 60 Hz, -24 dB/Octave Slope
    High-Pass at 80 Hz, -24 dB/Octave Slope
    High-Pass at 100 Hz, -24 dB/Octave Slope

Crossover

  • Crossover Frequency: 2.6 kHz

Connectivity

  • I/O: 1 x 3-Pin XLR Balanced Analog Input (20 kOhms)
    1 x 1/4" (6.3 mm) TRS Balanced Analog Input (20 kOhms)
    1 x RCA Unbalanced Analog Input (10 kOhms)

Power

  • AC Input Power: 100 to 120 VAC at 50/60 Hz
    220 to 240 VAC at 50/60 Hz
  • Power Consumption: 0.5 W (Standby)

General

  • Enclosure Material: MDF
  • Dimensions (W x H x D): 9.5 x 15 x 12" / 24.1 x 37.9 x 30.9 cm
  • Weight: 19.8 lb / 9.0 kg

Packaging Info

  • Package Weight: 22.4 lb
  • Box Dimensions (LxWxH): 19 x 16 x 13"