TANNOY CMS 503ICT LP 5" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Low Profile) (CMS 503ICT LP)
Vendor: Tannoy
Available
TANNOY CMS 503ICT LP 5" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Low Profile) (CMS 503ICT LP)
The CMS 503ICT LP is a full bandwidth 200-watt high-sensitivity loudspeaker that utilizes our third-generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 5" ICT (Inductive Coupling Technology) point source driver with an extended frequency range, the UL-certified CMS 503ICT LP delivers consistent broadband directivity with enhanced intelligibility. ICT drivers provide exceptional long-term reliability – and are ideal for constant-usage applications.
Optimized for Installation
The CMS 503ICT LP is meticulously crafted with a 4-way self-aligning clamp system, ensuring swift, straightforward, and cost-effective installation. Its ultra-shallow back can suits applications with limited cavity space, complemented by a removable locking screw terminal connector offering loop-thru functionality. This model includes a low-insertion loss 30 W transformer with user-friendly front panel tap switching, a paintable powder-coated steel mesh grille providing dust protection, along with two tile support rails and a C-ring. For aesthetic purposes, an Arco-style grille designed to conceal the entire unit, and a plaster (mud) ring, are available separately.
LAB GRUPPEN Ready
The CMS 503ICT LP is finished in semi-matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
Product Features
-
Full range ceiling loudspeaker for installation applications
-
50 Watts continuous, 200 Watts peak power
-
5" ICT (Inductive Coupling Technology) point source driver for extended frequency range
-
Ultra-shallow depth profile for applications where cavity space is restricted
-
High durability design for constant heavy usage in demanding applications
-
UL 1480 certified for general signalling systems
-
UL 2043 certified for air-handling spaces
-
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
-
Low insertion loss 30 W line transformer with easily accessible tapping switch
-
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
-
Semi matt white finish fits unobtrusively in any environment
-
Powder coated UV resistant perforated steel mesh grille with dust protection
-
Removable magnetic grille for custom painting
-
Optional ARCO designer grilles available for minimal architectural impact
-
Self-aligning 4 way clamp mounting system
-
Mounting C-ring and ceiling tile rails included
Performance
Frequency response (-3 dB) <sup>(1)</sup> |
88 Hz - 50 kHz |
Frequency range (-10 dB) <sup>(1)</sup> |
77 Hz - 54 kHz |
System sensitivity (1 W @ 1 m) <sup>(2)</sup> |
89 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle |
90 degrees conical |
Power Handling <sup>(3)</sup> | |
Average |
50 W |
Programme |
100 W |
Peak |
200 W |
Recommended Amplifier Power |
100 W @ 16 Ohms |
Nominal Impedance (Lo, Z) |
16 Ohms |
Rated maximum SPL | |
Average |
106 dB |
Peak |
112 dB |
Transformer Taps (via front rotary switch) | |
70 V |
30 W (165 O) / 15 W (330 O) / |
100 V |
30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) |
Transducers
Low Frequency |
1 x 130 mm (5.0") mineral loaded polypropylene |
High Frequency |
ICT |
Physical
Enclosure | |
Backcan |
Zinc plated steel |
Baffle |
Reflex loaded UL 94V-0 rated ABS |
Grille |
Steel, with weather resistant coating |
Safety Features |
Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design |
Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") |
Cable Entry Options |
Cable clamp & squeeze connector for conduit up to 22 mm |
Connectors |
Removable locking connector with screw terminals with “loop through” facility |
Compliance |
UL-1480, UL-2043, CE |
Dimensions | |
Bezel diameter |
274.0 mm (10.79") |
Front of ceiling to rear of backcan |
98.6 mm (3.88") |
Hole cutout diameter |
253.0 mm (9.96") |
Net Weight (ea) |
4.4 kg (9.70 lbs) |
Included Accessories |
C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
Optional Accessories |
Plaster (mud) ring, Arco grille |
Packed Quantity |
2 |
1. Average over stated bandwidth. Measured in an IEC baffle in an Anechoic Chamber
2. Unweighted pink noise input, measured at 1 metre on axis
3. Long term power handling capacity as defined in EIA - 426B test