TANNOY CMS 603ICT PI 6" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Pre-Install) (CMS 603ICT PI)
Vendor: Tannoy
Available
TANNOY CMS 603ICT PI 6" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Pre-Install) (CMS 603ICT PI)
The CMS 603ICT PI stands as a wide bandwidth 240-Watt high-sensitivity loudspeaker, incorporating our advanced Ceiling Monitor System technology (CMS 3.0). Equipped with an innovative 6" ICT (Inductive Coupling Technology) point-source driver featuring an extended frequency range, this UL certified speaker ensures consistent broadband directivity while significantly enhancing intelligibility. Renowned for exceptional long-term reliability, the ICT drivers make it an ideal choice for continuous-use applications.
Optimized for Installation
The CMS 603ICT PI is purposefully engineered with a self-aligning 4-way clamp system for rapid, straightforward, and cost-effective installation. Notably, it features an additional clamp extension to accommodate thicker ceiling panels and utilizes a locking design to prevent over-tightening. This model includes a convenient front panel tap switch to control the 60 W transformer housed in the optional CMS 603 PI BACKCAN. It also comes with a paintable powder-coated steel mesh grille offering dust protection, two tile support rails, and a C-ring. Separate accessories available for this unit include an Arco-style grille designed for complete unit concealment, a back can, and a plaster (mud) ring tailored for specific aesthetic preferences.
LAB GRUPPEN Ready
CMS 603ICT PI is finished in semi-matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
Product Features
-
Full range ceiling loudspeaker for installation applications
-
60 Watts continuous, 240 Watts peak power
-
6" ICT (Inductive Coupling Technology) point source driver for extended frequency range
-
Pre-install version supplied without back can (available separately)
-
High durability design for constant heavy usage in demanding applications
-
UL 1480 certified for general signalling systems
-
UL 2043 certified for air-handling spaces
-
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
-
Low insertion loss 60 W line transformer with easily accessible tapping switch
-
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
-
Semi matt white finish fits unobtrusively in any environment
-
Powder coated UV resistant perforated steel mesh grille with dust protection
-
Removable magnetic grille for custom painting
-
Optional ARCO designer grilles available for minimal architectural impact
-
Self-aligning 4 way clamp mounting system
-
Mounting C-ring and ceiling tile rails included
Performance
Frequency range (-10 dB) <sup>(1)</sup> |
46 Hz - 24 kHz |
System sensitivity (1 W @ 1 m) <sup>(2)</sup> |
91 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle |
90 degrees conical |
Coverage Angle (1 kHz to 6 kHz) |
92 degrees |
Directivity Factor (Q) |
7.1 averaged 1 kHz to 6 kHz |
Directivity Index (DI) |
7.9 averaged 1 kHz to 6 kHz |
Power Handling (3) | |
Recommended Amplifier Power |
120 W @ 16 Ohms |
Nominal Impedance (Lo, Z) |
16 Ohms |
Rated maximum SPL | |
Transformer Taps (via front rotary switch) | |
Crossover |
7 kHz inductively coupled |
Transducers
Low Frequency |
165 mm (6.50") mineral loaded polypropylene |
High Frequency |
ICT aluminium dome |
Physical
Enclosure | |
Safety Features |
Safety ring located at rear of enclosure for load bearing safety bond |
CMS 603ICT LS |
UL 1480 UUMW certification for Life Safety applications |
Clamping Design |
Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") |
Backcan Options |
Separate backcan for pre-installation |
Cable Entry Options |
Cable clamp & squeeze connector for conduit up to 22 mm |
Conduit Knockouts on PI Backcan |
3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10") |
Connectors |
Removable locking connector with screw terminals with “loop through” facility |
Compliance |
UL-1480, UL-2043, CE |
Dimensions | |
Hole cutout diameter (all models) |
253 mm (9.96") |
Net Weight (ea) | |
Included Accessories |
C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
Optional Accessories |
Plaster (mud) ring, Arco grille |
Packed Quantity |
2 |
1. Average over stated bandwidth. Measured in an IEC baffle in an Anechoic Chamber
2. Unweighted pink noise input, measured at 1 metre on axis
3. Long term power handling capacity as defined in EIA - 426B test