Teradek 10-2200 4K LT 750 3G-SDI/HDMI Wireless Transmitter and Receiver Kit

Vendor: Teradek
Teradek 10-2200 4K LT 750 3G-SDI/HDMI Wireless Transmitter and Receiver Kit The Teradek 10-2200, also known as Bolt 4K LT 750 4K TX/RX, is a professionally designed Wireless Transmitter and Receiver Kit capable to transmit and...
$2,990.00
Title

Teradek 10-2200 4K LT 750 3G-SDI/HDMI Wireless Transmitter and Receiver Kit

The Teradek 10-2200, also known as Bolt 4K LT 750 4K TX/RX, is a professionally designed Wireless Transmitter and Receiver Kit capable to transmit and receive any HD video without losing the quality ranging from up to 750' line of sight. The kit is made including a wireless transmitter and receiver that comes featuring display with bright OLED and capable to wirelessly receive up to 4K30 video with 10-bit 4:2:2 HDR support. Also, the transmitter is designed capable to input up to 4K video over HDMI or up to 1080p60 video with the use of 3G-SDI, and the receiver is capable to output video by using HDMI and 3G-SDI.

The transmitter is made for sending up to 4K30 video to the Bolt 4K LT receiver, and it is also possible to simultaneously transmit to up to six receivers. The system is featuring an improved metadata, range, and compatibility over its predecessors. The built-in AES-256 encryption along with RSA 1024 key pairing is intended for protecting your video from prying eyes, and also the noise rejection is keeping your video clean no matter how many devices are using the wireless spectrum. The Bolt LT system is also made capable of supporting the transmission of timecode and start/stop triggers from the camera.

The Bolt 4K series units are all cross-compatible, so you can transmit to different Bolt 4K series receiver models. The system also supports an iOS app that easily connects via Bluetooth, which provides a spectrum analyzer, channel selection tools, and remote configuration. There are 1/4"-20 and M3 mounting threads to mount your transmitter and receiver on a variety of cameras, cages, or rigs.

  • Transmitter/receiver set cross-compatible with all Bolt 4K series devices over 5 GHz signal spectrum
  • Transmitter input up to 4K via HDMI video; input 1080p via 3G-SDI, and transmit up to 4K30 video
  • Receiver supports up to 4K30 video and outputs 1080p via 3G-SDI and 4K via HDMI
  • Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut
  • Smaller and lighter chassis design than other Bolt transmitters
  • Transmit to up to six Bolt 4K series receivers
  • AES-256 encryption support and RSA 1024 key pairing support
  • Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Wireless
Wireless Range 750' / 228.6 m (Line-of-Sight)
# of Channels 13 (40 MHz)
25 (20 MHz)
Channel Bandwidth 40 MHz, 20 MHz
Frequency Range Non-DFS Frequencies
US: 5.19 to 5.23 GHz
US: 5.75 to 5.79 GHz
DFS Frequencies
US: 5.27 to 5.67 GHz
Latency < 0.01 ms
RF Power 17 dBm
Wireless Video Compression Uncompressed
Interfaces
Transmitter Antenna Ports 2 x RP-SMA
Receiver Antenna Ports 5 x RP-SMA
Transmitter Video Connectors 1 x HDMI Input
1 x BNC (3G-SDI) Input
1 x BNC (3G-SDI) Loop Output
Receiver Video Connectors 1 x HDMI Output
1 x BNC (3G-SDI) Output
Transmitter Other I/O 1 x USB Micro-B Input
Receiver Other I/O 1 x USB Micro-B Input
Embedded Audio SDI: 2-Channel
HDMI: 2-Channel
Encryption 256-Bit AES
Format Support
Video Format SDI/BNC:
1080p 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30, 59.94, 60 fps
1080PsF 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30 fps
1080i/720p 4:2:2 YCC 10-Bit at 50, 59.94, 60 fps
576p at 25, 50 fps
576i at 50 fps
480p at 59.94, 60 fps
480i at 59.94 fps
HDMI:
UHD 4K 4:4:4 RGB 10-Bit at 23.98, 24, 25, 29.97, 30 fps
1080p 4:4:4 RGB 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
1080PsF 4:4:4 RGB 10-Bit at 23.98, 24, 25, 29.97, 30 fps
1080i/720p 4:4:4 RGB 10-Bit at 50, 59.94, 60 fps
576p at 25, 50 fps
576i at 50 fps
480p at 59.94, 60 fps
480i at 59.94 fps
Audio Format 2-Channel 24-Bit 48 kHz LPCM Audio
Timecode Support Yes
Display
Transmitter Panel Type OLED
Receiver Panel Type OLED
Power
Transmitter Built-In Battery None
Receiver Built-In Battery None
Transmitter Power Connector 1 x 2-Pin LEMO (6 to 28 VDC) Input
Receiver Power Connector 1 x 2-Pin LEMO (6 to 28 VDC) Input
Transmitter Power Consumption Device: (9 W)
Receiver Power Consumption Device: (11 W)
Environmental
Operating Temperature 32 to 104°F / 0 to 40°C
General
Transmitter Mounting 1 x 1/4"-20 Female
1 x M3 Female
Receiver Mounting 1 x 1/4"-20 Female
1 x M3 Female
Materials Aluminum, PCB
Transmitter Dimensions 4.1 x 2.4 x 1.3" / 103 x 60 x 33 mm
Receiver Dimensions 4.8 x 3.7 x 1.1" / 122 x 94 x 27 mm
Transmitter Weight 7.3 oz / 206 g
Receiver Weight 10.3 oz / 292 g