Crown DCi 8|300DA DCI8300 DANTE

Crown DCi 8|300DA DCI8300 DANTE

The Crown DCi 8|300DA is one of the Crown DriveCore Install DA Series. It is a Eight-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V. For applications requiring Dante or AES67 networked audio it is the perfect unit to use. It is designed for providing a balance combination of channel count, output power and speaker load flexibility that works alongside with proprietary DriveCore® technology for maximum efficiency and admirable audio quality. The DCi DA Series comes with network control/monitoring, a high-powered DSP with JBL speaker tunings and the ability to drive 70V and 100V, 2/4/8/16 ohm speaker loads. The Crown DCi 8|300DA amplifier is perfect for installations, that have standardized on Dante for networked audio transport, because of its advanced capabilities and support for Dante Domain Manager.

Features

• Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
• Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
• Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
• Digital Signal Processing – DSP capabilities include the following:
• LevelMAX Limiters
• Input/Output EQ
• Crossover
• Delay
• Matrix Router
• Speaker Line Monitoring

• Redundant, independent Dante / AES67 ports
• Primary & Secondary
• Will accept 48khz or 96khz
• Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)
  • Audio Architect Control and Monitoring
  • DriveCore Amplifier Technology
  • Universal PFC Power Supply
  • DSP
• 48kHz processing
• 20 Presets
• Input router
  • High, medium, and low priority inputs
• Input delay up to 2s
• Input EQ
• Crossover
• Output EQ
• Output Delay up to 100ms
• LevelMAX limiter
• Load Monitoring
  • Pilot tone
• Normal
• Burst
  • Continuous Load Monitoring
  • Sweep Load Monitoring
• Channel Auto-Standby
• Speaker Tunings
  • Aux-Port
• Sleep contact closure
• Amp Status output
  • Removable air filters
  • Front panel LED indicators
  • AES67 Compatible